EMX DAK-2ULTMVP DRIVE-THRU ALERT KIT

EMX DAK-2ULTMVP DRIVE-THRU ALERT KIT

  • Manufacturer: EMX
  • Item Number:

  • $1,822.00


Looking for an all in one drive-thru sensor solution? It is finally here the EMX DAK-2ULTMVP

DAK-2ULTMVP OVERVIEW

The DAK-2ULTMVP drive-thru alert kit provides audio and visual indication to team members that need to know when a customer’s vehicle has pulled into the drive-thru lane. This system can be used in a wide variety of drive-thru applications requiring 2 detection zones, including fast-food restaurants, banking, and car wash.

The panel inside the junction box will have the transformer and ULT-MVP vehicle detectors mounted and prewired. Terminal blocks inside the panel will be available for easy connection of incoming power (120 VAC) and wire connections to the PR-46 loops and LED beacon. All of the vehicle detectors and the LED beacon will be preprogrammed.

FEATURES OF OUR DRIVE-THRU ALERT KIT

The DAK-2ULTMVP is a complete system for detecting vehicles and notifying staff for applications requiring dual-zone detection.

  • The ULT-MVP is a multi-voltage vehicle detector that will automatically adjust from 12 VDC up to 240 VAC to fit any installation. The ULTRAMETER™ display indicates the appropriate sensitivity setting to detect a vehicle near the loop. Ten sensitivity settings allow for fine adjustment of the detection level, while four frequency settings provide flexibility in preventing crosstalk in multi-loop applications. The ULT-MVP provides two relay outputs – one for indicating vehicle presence and a second for loop fault, pulse on entry/exit, or DETECT-ON-STOP™. DOS® allows detection only when a vehicle has come to a complete stop on the loop. This EMX exclusive feature ignores cross traffic in tight spaces.

 

  • The PR-46-100 is a ready-to-use, preformed loop with a 100-foot lead that can be shortened or spliced to extend as needed. The loop is housed in rugged and flexible 0.26” diameter thermoplastic rubber tubing and provides built-in lightning protection. It is suitable for all installations – saw cut, concrete, and tar.

 

  • The SLM500B is a LED beacon and sounder with three separate levels of alarm. Channel 1 includes a simulated strobe (triple flash). Channel 2 adds an audible tone (32 options included) to the simulated strobe effect. Channel 3 includes a steady light and a second, unique tone (32 options included) for a total of 64 unique tones. The volume of the tone is adjustable from 65-105 dBa.

 

ULTRA MVP Specs

Sensitivity 10 levels, 0-9
ULTRAMETER™ Display Indicates optimum sensitivity level, 0-9 Diagnostic aid
Loop frequency 4 settings (low, med-low, med-hi, high)
Loop inductance 20…2000µH (Q factor > 5)
Grounded loop Isolation transformer allows operation with poor quality loops
Automatic tuning Detector tunes to loop on power-up and following frequency count function
Environmental tracking Automatic compensation
Surge protection Loop circuitry protected by surge suppressors
Presence relay SPDT relay contacts (form C)
Output B relay SPDT relay contacts (form C)
Contact rating (resistive load) 2A @ 30VDC, 0.5A @ 125VAC
Power / loop fault indicator Green LED
Detect / frequency count indicator Red LED
Detect-On-Stop Requires vehicle to stop for a minimum of 1 second (1-2s typical)
ASB (Automatic Sensitivity Boost) Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
Power 12…60 VDC (Max. 0.8 VA) 12…240 VAC (48…62Hz) (Max. 1.4 VA)
Operating current 20mA standby / 50mA detect
Operating temperature -40°C…82°C (-40°F…180°F) 0…95% relative humidity
Dimensions (L x W x H) 73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
Weight 0.25 lbs. (113 g)
Housing ABS plastic, IP30
Connections Socket mount – 11 pin male (JEDEC B11-88)

PR-46-100 Specs

Operating Temperature -8°F to 194°F, -22°C to 90°C
Overall Diameter of Loop Wire 0.26″
Loop Dimensions 4×6′
Lead-In Wire 100′ twisted wire in PVC jacket
Loop Wire Approvals UL TC, PLTC, FPL or NPLF 300/600 Volt
40 mil nylon PVC direct burial

SLMB500B Specs

Voltage 12-24 VAC/DC
Flash Rate / Minute (Flash Mode) 85 (+/- 10)
3 Channels Included 1: Simulated strobe
2: Simulated strobe + tone 1
3: Steady light + tone 2
Decibels @ 1 M Min. 65, Max. 105
Max Operating Current 460 mA @ 24 VAC/DC
Material Polycarbonate, Type 3R, IP65 enclosure
Weight Beacon: 7.05 oz (0.20 kg)
Bracket: 6.70 oz (0.19 kg)
Light Source 50,000 hour LED
Operating Temperature -22°F to 122°F, -30°C to 50°C
Certifications CE, cUL listed

 


Join Our Mailing List

Get our latest news and exclusive offers.

 

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods