EMX Wireless Edge Link WEL-200 Monitored Edge Combo Kit Feat 4' ASO Sentir Edge
Manuals & Support · installation manuals, wiring diagrams and troubleshooting
EMX Wireless Edge Link WEL-200 Monitored Edge Combo Kit Feat 4' ASO Sentir Edge
Manuals & Support · installation manuals, wiring diagrams and troubleshooting
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
The EMX WEL-200 combo kit pairs a WEL-200 Wireless Edge Link (transmitter and receiver) with a ASO Sentir 4 ft monitored 10K safety edge. The edge mounts on the gate and the link sends its status to the operator without wiring between them, for UL 325 monitored entrapment protection.
The link runs at 915 MHz with 25 selectable channels and a range of up to 200 ft line of sight. Response time is 100 ms. The transmitter runs on two AA lithium batteries with about 2 years of life. The receiver has two channels, pairs with up to 4 transmitters, and outputs N.O./N.C. relay, a 10K resistive signal, or a 300 Hz pulse. Both units are in NEMA 4X enclosures and operate from -40°F to 140°F.
What's Included
- WEL-200T transmitter
- WEL-200R receiver
- ASO Sentir 4 ft monitored 10K edge
- 2 cable grip inserts
- 2 AA lithium batteries
Before You Order
- Receiver power: 12-24 VAC or VDC. Current draw is 42 mA with 1 relay active and 70 mA with 2.
- Works with operators that take a 10K, N.C., or pulsed monitored entrapment input. Confirm the input type on the operator board.
- Each transmitter connects one edge. Up to 4 transmitters can pair with one receiver if you add edges later.
- Red board units are not compatible with older green board units.
- UL325-2018 compliant
- Operating range up to 200 ft. (61 m)
- Operating frequency 915 MHz
- NEMA 4X enclosures
- Operating Range: 200 ft (line of sight)
- Operating Frequency: 915 MHz (25 possible channels)
- Response Time: 100 ms
- Operating Temperature: -40 to 140°F (-40 to 60°C)
Receiver (WEL-200R)
- Power: 12-24 VDC/VAC
- Current Draw: 1 relay 42 mA, 2 relays 70 mA
- Surge Protection: Thermal fuse, MOV
- Outputs: 300 Hz pulsed, or relay with selectable 10K ohm resistor across normally open contact
- Dimensions: 5.5 x 1.3 x 3.5 in (140 x 34 x 90 mm)
- Connections: 12 terminals
Transmitter (WEL-200T)
- Power: 2 AA lithium batteries, approx. 2 year life
- Surge Protection: Thermal fuse
- Edge Resistance Range: 4K to 12K ohms (resistive edges only)
- Dimensions: 7 x 1.3 x 2.6 in (180 x 32 x 67 mm)
- Connections: 2 terminals
- Part Numbers: EMX-4012-2 WEL-200K kit; EMX-4011-2 WEL-200T transmitter; EMX-4010-2 WEL-200R receiver
- Operating Range: Up to 200 ft (line of sight)
- Operating Frequency: 915 MHz
- Response Time: 100 ms
- Environmental Rating: NEMA 4X
- Operating Temperature: -40 to 140°F (-40 to 60°C)
WEL-200T Transmitter
- Power/Fault Indicator: Green, yellow and red LEDs visible through the housing viewport
- Edge Resistance Range: 4K to 12K ohms (resistive edges only)
- Power Protection: Thermal fuse
- Power Supply: 3-3.6 VDC (2 x AA batteries, ANSI 15-LF, IEC-FR14505 (FR6))
- Battery Life: 2 years at 25°C (77°F)
- Dimensions (L x W x H): 7.0 x 1.3 x 2.6 in (180 x 32 x 67 mm)
- Weight: 180 g
- Connections: 2 terminals (18-26 AWG)
WEL-200R Receiver
- Power/Fault Indicator: Red power LED, green channel LED
- Channel Status Indicator: Green LED
- Signal Quality Display: One digit (0-9) for the selected transmitter
- Channel Mode Selection: Assign each channel to OPEN or CLOSE function
- Outputs: OPEN relay and CLOSE relay: Form C contacts (NO, COM, NC); OPEN pulsed and CLOSE pulsed: open collector transistor output (opto-isolated)
- Resistive Termination: 10K ohm across NO contact (selectable per relay group)
- Power Protection: Thermal fuse, MOV
- Power Supply: 12-24 VAC/VDC
- Current Draw: Approx. 42 mA (one relay), 70 mA (two relays)
- Dimensions (L x W x H): 5.5 x 1.3 x 3.5 in (140 x 34 x 90 mm)
- Weight: 200 g (7 oz)
- Connections: 12 terminals (18-26 AWG)
Manuals & Support: installation manuals, wiring diagrams and troubleshooting
Used to send a gate-mounted monitored safety edge signal to the operator without wiring between them.
- Slide and swing gates with monitored safety edges
- UL 325 monitored entrapment protection
- Gates where edge wiring is not practical
- Up to 200 ft line of sight
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com
