Tomar 1790-1014-S&M2 STROBESWITCH & PWR MODULE

Tomar ITEM: TOM 1790-1014-SM2
Tomar 1790-1014-S&M2 STROBESWITCH with power module

Tomar 1790-1014-S&M2 STROBESWITCH & PWR MODULE

Tomar ITEM: TOM 1790-1014-SM2
Regular price $605.75
/
  • Current Trade Policy Costs Included In Price
  • In Cart Discounts Offered on Many Products
  • GSA, Net 30 and purchase orders available
Shipping calculated at checkout.

Description

Tomar 1790-1014-S&M2 is a STROBESWITCH kit: one 1790-1014 detector with a 1790M-2 power module. The detector reads the coded optical signal from emergency vehicle emitters and the module opens the gate.

Typical range is about 200 ft, depending on emitter intensity. Field of view is 10° vertical by 90° horizontal. A red LED lights on a valid signal. Digital frequency discrimination rejects flashlights, vehicle light bars and flashing signs, and radio interference has no effect. The 1790M-2 power module runs on 12 to 24 VAC or VDC and switches a DPDT relay rated 2 A at 30 VDC or 0.6 A at 120 VAC. A dial sets gate open time from 0 to 30 minutes, plus a continuous latch mode.

What's Included

  • 1790-1014 STROBESWITCH detector
  • 1790M-2 power module

Before You Order

  • Works with Tomar 780-1228-PRE and GTT Opticom emitters.
  • Each detector has a 1/2 in female pipe hub mounting base.
  • Test without a fire truck on site using the Tomar 1760-14 tester.
  • 2-year warranty.
  • The 1790M-2 module can run up to three detectors.

The model 1790 STROBESWITCH™ is a compact low cost detector which detects a special strobe light signal and opens access gates to allow quick entrance. The detector is activated by the strobe emitters used by most fire department emergency vehicles to control traffic signals en route to a fire. The 1790–1014 STROBESWITCH™ interfaces with the TOMAR model 780–1228–PRE or GTT OPTICOM® traffic preemption optical signal emitters. The model 1790 features a 1/2” female pipe hub mounting base.

HOW IT WORKS:
The emergency vehicle uses a special strobe light to transmit a continuously flashing optical signal. The TOMAR 1790–1014 STROBESWITCH™ receives this signal, and if the signal format is correct, activates a relay. The relay contacts may be used to control security gates, fire department garage doors, and other devices. Signaling is optical by line of sight, and the 1790 can operate indoors or outdoors, in bright sunlight, or in any weather. The unit is not susceptible to radio frequency interference, and uses digital frequency discrimination to reject unwanted signals, such as flashlights, emergency vehicle lighting systems, flashing signs, etc. 1790–1014 STROBESWITCH™

  • Range: 200 ft typical, depends on the intensity of the strobe emitter
  • Field of View: 10° vertical, 90° horizontal
  • Signal Acquisition Time: 0.64 seconds
  • Function Indicator: Red LED lights whenever a proper optical signal is received; visible through the viewport for 25 ft or more; can be used with the optional hand held tester to verify operation
  • Frequency: F14 = 14.035 Hz ± 0.25 Hz (high priority); F10 = 10.000 Hz ± 0.25 Hz (low priority)
  • 1790M-2 Power Module: 12 - 24 VAC/VDC; DPDT relay output 2 A @ 30 VDC, 0.6 A @ 115 VAC; 0 - 30 minute time delay plus continuous latch mode; remote reset

Optical detectors that open a gate for emergency vehicles with strobe or optical emitters.

  • Gated communities
  • Fire department access gates
  • Commercial and industrial gates
  • Fire station bay doors

All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.

LEADTIME

Items with lead times typically ship in 4-7 business days.

FREE SHIPPING POLICY

Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items

Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.

Read return policies

Protec Controls accepts purchase orders please contact us.

NET 30

We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.

GOVERNMENT & GSA

Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com

Recommended Accessories


You may also like

Reviews