Bucles BD
67 artículos
67 artículos
BD Loops preformed loops, loop sealants and install tools for vehicle detection at gates and parking entrances. We carry SC saw-cut loops and EL and RL direct burial loops in 14' to 52' perimeters, BD-LS Loop Shield and BD-LG2 sealants, diamond saw blades, the BD-Megger tester and the E-Z Detector Checker.
The letters give the loop style and the two numbers give the perimeter and the lead-in length in feet. An SC 24-50 is a saw-cut loop with a 24' perimeter, laid out as 4'x8' or 6'x6', and a 50' lead. SC loops come with 20', 50' or 100' leads, RL loops with a 40' lead, and EL loops with 60' or 100'. Measure the run from the loop to the detector so the lead reaches without a splice.
Pick an SC loop when you are cutting a slot into existing concrete or asphalt. RL and EL loops are direct burial loops, set in place before pavement is poured or under pavers and base. Pair any of them with a detector from loop detectors, and compare other sizes in preformed loops.
BD-LS Loop Shield, in black or gray, replaces Loop Goop for sealing saw cuts. BD-LG2 is a two-part polyurethane that dispenses with the LG2-GUN. The 14" Pro Diamond and 7" SB-B7 blades cut the slot, the pizza wheel presses wire into it, and the water-tight splice kit protects lead connections. The BD-Megger checks loop insulation and the E-Z Detector Checker helps confirm a detector is responding.
Match the loop to the lane and the detection zone you need, then pick the lead length. Not sure? See vehicle detection or send us your lane width.