Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
Look up parts for the HySecurity StrongArm hydraulic barrier gate operator with this interactive diagram. Click a part on any view to get its part number, or read the list below. The views open the control box cover, then the inside of the control box, the top with the crankshaft and limit parts, and the pump pack with its valves and motors.
Identify your model
The StrongArm is a hydraulic barrier operator built as the 14F, 20, 28 and 36, plus the DOT 28. The standard models take arms up to 36 ft, while the DOT version is listed only up to 28 ft and adds a breakaway arm bracket. The StrongArmPark DC is a separate DC barrier with its own parts. Match the voltage on the operator nameplate before you order a motor or pump pack.
Related models: HySecurity StrongArmPark DC
Operator and manuals
- StrongArm manual (PDF)
- StrongArm spec sheet (PDF)
- StrongArm diagrams (PDF)
- StrongArm DOT addendum (PDF)
Most ordered parts
- Placa de alimentación de CA HySecurity MX000487 (MX000487)
- Transformador HySecurity MX000486 24 V CA 75 VA 60 Hz - Todos los 60 Hz excepto 575 V CA (MX000486)
- HySecurity MX000585 SlideDriver Control Board Smart Touch (MX000585)
- HySecurity MX000169 Desconexión rápida, enchufe, 1/8 pulgada (MX000169)
- Placa Hysecurity MX3356, pantalla (MX3356)
- Bobina de válvula direccional HySecurity MX000184 SlideDriver Smart Touch (MX000184)
- Cable HySecurity MX000046, cinta, LCD (MX000046)
- Contactor de motor HySecurity MX000485 (MX000485)
Parts list by assembly
Control Box Cover
Control Box Inside
Top
| Part number | Part |
|---|---|
| MX000299 | Cámara de límite Hysecurity MX000299 |
| MX001100 | MX001100 Cigüeñal, cojinete de cigüeñal y engrasador |
| MX001777 | MX001777 Interruptor de límite |
| MX000312 | MX000312 Pasador, Cilindro, Acero Inoxidable |
| MX000306 | MX000306 Cojinete, cigüeñal, 4 pernos |
Pump Pack
Common questions
How do I lower the StrongArm arm without power?
HySecurity's emergency override uses the needle valve. Turn it slowly counterclockwise until the arm lowers smoothly. When the arm is open, close the bypass valve so it does not drift down.
What power circuit does the StrongArm need?
HySecurity specifies a 20A circuit at minimum, protected by a 20A inverse time breaker, with a slow kick (thermal) breaker for AC motors.
How often should the StrongArm be tested?
HySecurity says to test the gate operator monthly.