Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
This is a parts diagram for the LiftMaster IHSL24UL industrial slide gate operator. The photo views show the front, the main chassis, the drive section, the control boards and the loop detector board. Below the photos you will find each IHSL24UL part we list with its K41 part number, from the motor and gear reducer to the relay board and transformer.
Identify your model
The IHSL24UL and INSL24UL share a product guide but are built for different gates. The IHSL24UL uses #50 chain and is rated for 5,500 lb and 90 ft of travel. The INSL24UL uses #40 chain and is rated for 2,200 lb and 70 ft. Check the chain size on your operator to tell the two apart.
Related models: LiftMaster SL585, LiftMaster SL3000UL, LiftMaster RSL12UL, LiftMaster CSL24UL
Operator and manuals
- Operator: Liftmaster IHSL24UL 24VDC Continuous Duty Industrial Slide Gate Operator
- IHSL24UL spec sheet (PDF)
- IHSL24UL and INSL24UL product guide (PDF)
Most ordered parts
- Detector de bucle enchufable Liftmaster LOOPDETLM (LOOPDETLM)
- Sensor fotoeléctrico retrorreflectivo monitoreado LMRRUL de Liftmaster (LMRRUL)
- Placa de accionamiento del motor BLDC Liftmaster K41-0245-000 (K41-0245-000)
- Alarma Liftmaster K41-0248-000 (K41-0248-000)
- Piñón de salida Liftmaster K41-0243-000 (K41-0243-000)
- Rueda dentada tensora Liftmaster K41-0240-000, cantidad 2, IHSL24UL (K41-0240-000)
- Motor Liftmaster K41-0254-000 (K41-0254-000)
- Placa de control Liftmaster K41-0073-000 - Operadores industriales y de servicio pesado de 24 V CC (K41-0073-000)
Parts list by assembly
Main
| Part number | Part |
|---|---|
| K41-0241-000 | Transformador Liftmaster K41-0241-000 |
| K41-0083-000 | Rectificador de puente Liftmaster K41-0083-000 |
| K41-0256-000 | Conjunto de enclavamiento Liftmaster K41-0256-000 |
| K41-0248-000 | Alarma Liftmaster K41-0248-000 |
Drive Section
| Part number | Part |
|---|---|
| K41-0254-000 | Motor Liftmaster K41-0254-000 |
| K41-0252-000 | Reductor de engranajes Liftmaster K41-0252-000 |
| K41-0243-000 | Piñón de salida Liftmaster K41-0243-000 |
| K41-0240-000 | Rueda dentada tensora Liftmaster K41-0240-000, cantidad 2, IHSL24UL |
| K41-0247-000 | Sistema de límite Liftmaster K41-0247-000 |
| K41-0246-000 | Codificador del sistema de límite Liftmaster K41-0246-000 |
Control Boards
| Part number | Part |
|---|---|
| K41-0073-000 | Placa de control Liftmaster K41-0073-000 - Operadores industriales y de servicio pesado de 24 V CC |
| K41-0245-000 | Placa de accionamiento del motor BLDC Liftmaster K41-0245-000 |
| K41-0072-000 | Placa de relés Liftmaster K41-0072-000 |
Loop Board
| Part number | Part |
|---|---|
| LOOPDETLM | Detector de bucle enchufable Liftmaster LOOPDETLM |
Front
| Part number | Part |
|---|---|
| LMRRUL | Sensor fotoeléctrico retrorreflectivo monitoreado LMRRUL de Liftmaster |
Common questions
What is the IHSL24UL rated for?
LiftMaster rates the IHSL24UL for gates up to 5,500 lb and 90 ft of travel, with continuous, high cycle duty.
Can the IHSL24UL run on three phase power?
It takes 120/230V single phase input. LiftMaster's optional 3PHCONV kit converts 208/230/460/575VAC to 120VAC.