Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
This interactive diagram covers the Linear HSLG single phase slide gate operator. Click a part to see its part number, or find it in the list that follows. Layers walk through the pulleys and motor, the brake, the control box, the clutch, the limit box and the output shaft. Single phase HSLG motors and brakes are voltage specific, so check your motor plate first.
Identify your model
Linear builds the HSLG in single phase versions at 115, 208 and 230 V, in 1/2, 3/4 and 1 HP. A wiring print is on the label inside the operator cover. The HSLG parts lists split the controller parts into single phase and three phase, and only single phase models use the dust cover. Note your model and serial number before you order.
Related models: Linear HSLG Three Phase
Operator and manuals
- Operator: Linear OSCO HSLG-111 1HP Slide Gate Operator
- HSLG installation manual (PDF)
- HSLG spec sheet (PDF)
- HSLG electrical drawing (PDF)
Most ordered parts
- Revestimiento de embrague Linear 2100-564 (2100-564)
- Tuerca de límite lineal 2200-030 (2200-030)
- Lineal 620-101293 Apex II (620-101293)
- Resorte de tensión de cadena Linear 2200-306 (2200-306)
- Rodamiento de precisión lineal 2200-215 (2200-215)
- Kit de alarma Linear 2500-867 - Pre-Apex (2500-867)
- Linear 2200-938 Correa trapezoidal 28 ESTILO 4L DENTADA (2200-938)
- Conjunto de embrague de eje lineal 2110-274 (2110-274)
Parts list by assembly
Main
| Part number | Part |
|---|---|
| 2100-910 | Manija de pestillo Linear 2100-910 |
| 2500-867 | Kit de alarma Linear 2500-867 - Pre-Apex |
| 2510-248 | Conjunto de soporte y botón de parada/reinicio Linear 2510-248 |
| 2200-008 | Piñón lineal 2200-008, 48-B-10, diámetro interior de 1/2" |
| 2200-291 | Resorte de palanca de cambios y bloqueo Linear 2200-291 |
Pulley
| Part number | Part |
|---|---|
| 2200-309-UPS | POLEA LINEAL 2200-309-UPS 7 DOBLE 5/8B UPS |
| 2200-207-UPS | POLEA LINEAL 2200-207-UPS 2 DBL 5/8B HSLG UPS |
| 2200-938 | Linear 2200-938 Correa trapezoidal 28 ESTILO 4L DENTADA |
| 2110-240 | Conjunto intermedio de eje lineal 2110-240 HSLG UPS |
| 2500-2309 | Motor lineal 2500-2309 de 3/4 HP, 115 V, monofásico |
| 2500-2312 | Lineal 2500-2312 MTR-L PSC 1H 1P ODP R/CF 230 |
| 2500-2307 | Motor lineal 2500-2307, 1/2 HP, 115 V |
| 2500-2308 | Motor lineal 2500-2308, 1/2 HP, 208/230 V, monofásico |
| 2500-2309 | Motor lineal 2500-2309, 3/4 HP, 115 V, monofásico |
| 2500-2310 | Lineal 2500-2310 MTR-L PSC 3/4H 1P ODP R/CF 230 |
Brake
| Part number | Part |
|---|---|
| 2100-765 | Eje de polea lineal 2100-765-PLT |
| 2200-215 | Rodamiento de precisión lineal 2200-215 |
| 2200-233-UPS | Conjunto de collares Linear 2200-233-UPS 5/8 UPS |
| 2100-547-UPS | Linear 2100-547-UPS DISCO DE FRENO CON LLAVE HSLG JH UPS |
| 2500-178-UPS | FRENO SOLENOIDE LINEAR 2500-178-UPS 115 V UPS |
| 2200-939 | Resorte de manija de bloqueo Linear 2200-939 |
| 2510-398 | Conjunto de freno lineal 2510-398 115 V HSLG |
| 2510-399 | Conjunto de freno lineal 2510-399 230 V HSLG |
| 2510-400 | Conjunto de freno lineal 2510-400 460 V HSLG |
Control Box
| Part number | Part |
|---|---|
| 620-101293 | Lineal 620-101293 Apex II |
| 2510-422 | Linear 2510-422 CAJA DE ALIMENTACIÓN CONJUNTO SW/SL 115V APEX |
| 2500-2393 | Placa de control lineal APEX OSCO 2500-2393 |
| 106604 | Lineal 106604: Antena local |
| 2520-525 | Arnés de cableado Apex complejo Linear 2520-525 |
Clutch
| Part number | Part |
|---|---|
| 2100-1008 | Eje de embrague lineal 2100-1008-PLT |
| 2200-292-UPS | Linear 2200-292-UPS SPRKT 41-B-12 5/8B UPS OXIDADO |
| 2200-150 | Cadena Linear 2200-150 #41, 20 eslabones |
| 2400-149-UPS | Cadena UPS Linear 2400-149-UPS #41 30 ESLABONES |
| 2110-274 | Conjunto de embrague de eje lineal 2110-274 |
| 2400-062 | Tuerca de seguridad Linear 2400-062, 5/8"-18 |
| 2400-061 | Tuerca hexagonal lineal 2400-061, 5/8"-18 |
| 2200-306 | Resorte de tensión de cadena Linear 2200-306 |
| 2100-669-UPS | EMBRAGUE DE CUBO Linear 2100-669-UPS UPS CON PASADOR IR FUNDIDO |
| 2400-273 | Llave lineal 2400-273 (3/16" x 1/4") |
| 2100-564 | Revestimiento de embrague Linear 2100-564 |
| 2200-294 | Piñón lineal 2200-294 41-A-36 |
Limit Box
| Part number | Part |
|---|---|
| 2200-030 | Tuerca de límite lineal 2200-030 |
| 2100-057-UPS | Linear 2100-057-UPS EJE LÍMITE UPS ESTÁNDAR |
| 2500-2347 | Interruptor de límite lineal SPDT OMRON D2VW 2500-2347 |
| 2200-654 | Cadena de eje de límite Linear 2200-654 (#48 / 30 eslabones) |
| 2520-173L | Conjunto de caja de límite rotativa Linear 2520-173L |
Output Shaft
| Part number | Part |
|---|---|
| 2110-131 | Conjunto de bloque de desconexión Linear 2110-131 |
| 2120-132 | Conjunto de palanca de cambios Linear 2120-132 |
| 2110-236 | Conjunto de salida de eje lineal 2110-236 HSLG UPS |
| 2100-917-UPS | Eje de salida lineal 2100-917 (1") HSLG |
Common questions
How do I disconnect the HSLG to move the gate by hand?
The disconnect is at the center bottom of the cabinet. Pull the spring loaded shifter lever straight toward you until the locking lever snaps in behind it. To re-engage, move the locking lever to the right. Limit settings are not affected.
How often should the HSLG be lubricated?
Linear says to grease the bearings at least twice a year with a lithium complex NLGI 2 grease. The motors have sealed bearings and need no lubrication.
How much slack should the drive chain have?
About 1/4 in to 3/8 in of slack per foot of drive chain is acceptable. Inspect, clean and wipe the chain with a lightly oiled rag every six months.