Buscador de piezas de repuesto para SLC lineal

Part of the EZ Parts Finder: pick a part on the diagram or use the list below.

Look up Linear SLC slide gate operator parts with this interactive diagram. Clicking a part brings up its part number, and the list below repeats each one by assembly. The views take you from the cover to the main chassis, the back with the motor and belt, the Apex controller, the limit box, both sides, the release and the drive.

Identify your model

The Linear SLC runs a 1/2, 3/4 or 1 HP single phase motor on 115 or 230 VAC, through a 20:1 oil bath gear reducer. The 1/2 and 3/4 HP models use a #41 drive sprocket and the 1 HP model uses a #40 sprocket. Check the horsepower on your operator before ordering sprockets or chain.

Operator and manuals

Most ordered parts

Parts list by assembly

Cover

Main

Back

Apex

Limit Box

Left Side

Common questions

What motors does the Linear SLC use?

Linear lists 1/2, 3/4 or 1 HP single phase instant reversing motors, on 115 or 230 VAC single phase power.

How fast does the SLC open the gate?

Linear rates the SLC at about 11 inches per second.