Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
Find Linear VS-GSLG single phase slide gate operator parts on this interactive diagram. Click a highlighted part to see the part number, or use the list at the bottom. Photos cover the main housing, drive section, control box with the VFD, limit box, gearbox and drive shaft. Note that single phase VS-GSLG units run three phase motors through the drive.
Identify your model
The VS-GSLG controller description gives the horsepower, voltage and input phase, for example 1/2 HP, 115V, 1-Phase. Linear lists the VS-GSLG motors as 208/230/460V three phase, and some Hitachi drive controllers are listed for 1 or 3 phase input. The wiring tables are split into single phase and three phase models. Note the serial number before you order.
Related models: Linear VS-GSLG Three Phase
Operator and manuals
- Operator: Linear OSCO VS-GSLG-211 1/2 HP Variable Speed Slide Gate Operator
- VS-GSLG installation manual (PDF)
- VS-GSLG spec sheet (PDF)
- VS-GSLG electrical drawing (PDF)
Most ordered parts
- Tuerca de límite lineal 2200-030 (2200-030)
- Lineal 620-101293 Apex II (620-101293)
- Interruptor de límite lineal 2500-764 (2500-764)
- FRENO Linear 2500-2397 CARA C 208/230/460 V CA (2500-2397)
- Interruptor de límite lineal SPDT OMRON D2VW 2500-2347 (2500-2347)
- Placa de control lineal APEX OSCO 2500-2393 (2500-2393)
- Conjunto de soporte y botón de parada/reinicio Linear 2510-248 (2510-248)
- FRENO Linear 2500-2396 CARA C 115 V CA (2500-2396)
Parts list by assembly
Main
| Part number | Part |
|---|---|
| 2510-248 | Conjunto de soporte y botón de parada/reinicio Linear 2510-248 |
Drive Section
| Part number | Part |
|---|---|
| 2500-2397 | FRENO Linear 2500-2397 CARA C 208/230/460 V CA |
| 2200-605 | Cadena Linear 2200-605 #40, 37 eslabones |
| 2200-817 | Arandela Belleville Linear 2200-817 |
| 2100-1650 | Placa lineal 2100-1650 TOR LIM VS/GSLG VGROOVE |
| 2300-390 | Disco de fricción lineal 2300-390 (par) |
| 2210-004 | Piñón lineal 2210-004, 40 A 48, con rodamiento |
| 2500-2396 | FRENO Linear 2500-2396 CARA C 115 V CA |
| 2200-551 | Reductor lineal 2200-551 10:1 VS-GSLG GSL |
| 2200-654 | Cadena de eje de límite Linear 2200-654 (#48 / 30 eslabones) |
| 2100-910 | Manija de pestillo Linear 2100-910 |
| 2200-291 | Resorte de palanca de cambios y bloqueo Linear 2200-291 |
| 2120-132 | Conjunto de palanca de cambios Linear 2120-132 |
Control Box
| Part number | Part |
|---|---|
| 620-101293 | Lineal 620-101293 Apex II |
| 2500-2393 | Placa de control lineal APEX OSCO 2500-2393 |
| 2500-2084-HALF | Contactor lineal 2500-2084-half, 24 V CA, 4 polos, AB, medio |
| 2510-529 | Variador de frecuencia lineal 2510-529 de 1 HP y 1/2 HP, 230 V, 1 polo |
| 2520-525 | Arnés de cableado Apex complejo Linear 2520-525 |
| 106604 | Lineal 106604: Antena local |
Limit Box
| Part number | Part |
|---|---|
| 2200-030 | Tuerca de límite lineal 2200-030 |
| 2100-057-UPS | Linear 2100-057-UPS EJE LÍMITE UPS ESTÁNDAR |
| 2500-2347 | Interruptor de límite lineal SPDT OMRON D2VW 2500-2347 |
| 2500-764 | Interruptor de límite lineal 2500-764 |
Gearbox
| Part number | Part |
|---|---|
| 2200-115 | Resorte de collar de desconexión Linear 2200-115 |
| 2110-131 | Conjunto de bloque de desconexión Linear 2110-131 |
| 2110-364 | Piñón lineal 2110-364, 40 A 24, con cojinete |
| 2400-017 | Arandela plana lineal 2400-017, 3/8" |
Drive Shaft
| Part number | Part |
|---|---|
| 2100-1737 | Placa de retención del bloque de almohada Linear 2100-1737 |
| 2100-1738-UPS | Eje de salida del UPS lineal 2100-1738 |
| 2200-042-PLT | Piñón lineal 2200-042-PLT 48-B-15, diámetro interior de 1" |
Common questions
How do I disconnect the VS-GSLG?
Turn the power off first and never use the disconnect while the gate is moving. Pull the red spring loaded shifter lever toward you until the locking lever snaps in behind it. Move the locking lever to the right to re-engage.
What oil goes in the VS-GSLG gear reducer?
Linear says to check the gear reducer oil level every 12 months and top it up with #90/140 oil.
How often should the bearings be greased?
Grease the pillow block bearings twice a year with a lithium complex NLGI 2 grease. The motors have sealed bearings.