AES ETRANS50 Wireless Kits: e-Trigger, Long Range Fobs, e-Keypad Manuals & Support

AES E-TRIGGER-KIT / ETRANS50-TX-LR-KIT / EKPD

AES e-Series kits send a wireless open signal to an ETRANS50 transceiver wired to the gate operator. This saves a trench across the driveway.

The ETRANS50 runs on 10 to 36 VDC and has one relay that wires to the operator open input.

Buy the E-TRIGGER-KIT / ETRANS50-TX-LR-KIT / EKPD (4 options)

Identify your model

E-TRIGGER-KIT: wires to an intercom or other device relay. ETRANS50-TX-LR-KIT: 4 E-TX fobs and a 12 dBi antenna for long range. EKPD-K: wireless e-Keypad with ETRANS50. EKPD: keypad only.

Key specs

Radio 433.39 MHz
ETRANS50 power 10 to 36 VDC
ETRANS50 relay COM and N/O, 1 A
e-Trigger range Up to 328 ft
LR fob range Up to 380 yd line of sight
e-Keypad 200 codes, CR2450 battery

Manuals and documents

Installation Manual

Quick Start

Spec Sheet

Troubleshooting

Gate does not open

  • Check power at the ETRANS50.
  • Code the remote, keypad or e-Trigger to the transceiver again.
  • Check the relay wiring to the operator open input.

Short range

  • Do not put the ETRANS50 in a metal box.
  • Mount the transceiver or antenna high.

Common questions

No. It runs on a CR2450 coin cell and mounts with two screws.

It sends the relay signal from an intercom or other device to the gate with no cable.

Up to 380 yards line of sight with the 12 dBi antenna.