Identify your model
The CS101 detector plugs into an LD-11 11-pin socket. The probe is a 17 in PVC tube with shielded 3-wire direct burial cable. Probe length is in the part number, such as PROBE-100 for 100 ft of lead.
Key specs
| Detection | Up to 12 ft at 5 mph minimum |
|---|---|
| Power | 9 to 41 VDC or 6 to 29 VAC |
| Current | 2.5 mA standby, 50 mA detect |
| Relay | Form C, 1 A at 24 VDC or 115 VAC |
| Output time | 0.5 to 6 seconds |
| Connector | 11-pin |
| Probe | 17 x 1 in PVC, shielded direct burial cable |
| Operating temperature | -40 to 180 °F |
Manuals and documents
Installation Manual
-
CarSense 101 Instruction Manual
View PDF: CarSense 101 Instruction Manual (opens in a new tab)
Spec Sheet
-
CarSense 101 Cut Sheet
View PDF: CarSense 101 Cut Sheet (opens in a new tab)
Troubleshooting
Common questions
No. The CarSense 101 senses moving vehicles at 5 mph or more.
Pick the lead-in that reaches the detector without a splice: 50, 100, 150 or 200 ft.
A standard 11-pin socket such as the LD-11, or an 11-pin harness.