Seco-Larm SK-2323 Mullion Sealed Keypads Manuals & Support

Seco-Larm SK-2323-SDQ / SK-2323-SPQ

The Seco-Larm SK-2323 keypads are mullion-size versions of the SK-1323 for narrow door frames and posts. The brushed aluminum housing is IP65 and the circuit is potted in epoxy.

They hold 1,010 users, run on 12 to 24 VAC/VDC and have two Form C relays rated 1 A at 30 VDC. The SK-2323-SPQ adds a 125 kHz prox reader.

Buy the SK-2323-SDQ / SK-2323-SPQ (2 options)

Identify your model

SK-2323-SDQ: keypad only. SK-2323-SPQ: keypad with prox. Both are narrow brushed aluminum units with backlit keys. The wider versions are the SK-1323.

Key specs

Users 1,010: 1,000 on output 1, 10 on output 2
Operating voltage 12 to 24 VAC/VDC
Relays 2, Form C, 1 A at 30 VDC
Output time 1 to 99 seconds or toggle
Prox SPQ: 125 kHz EM
Inputs 2 egress, door sensor
IP rating IP65

Manuals and documents

Installation Manual

Wiring Diagram

Spec Sheet

Troubleshooting

Lock does not release on a good code

  • Check that the lock wire is on the correct relay terminal: N.O. for fail-secure, N.C. for fail-safe.
  • Install the diode across a DC lock or a varistor across an AC lock, unless the lock has its own protection.

Keypad is dead

  • Check the supply voltage at the power leads.

Common questions

Yes. It is mullion size for narrow door frames and posts.

125 kHz EM prox credentials, such as PR-K1S1-A cards and PR-K1K1-AQ key fobs. They are sold separately.

Yes. Change the factory master code during setup and record the new one.