Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
Find Viking L-3 slide gate operator parts on the interactive diagram below. Click a part in the photo to see its Viking part number, or use the list after the diagram. The views cover the operator cover, the main chassis with the battery and motor, the two power box photos, the motor and gear box, and the back of the unit with the loop rack.
Identify your model
The L-3 control board LCD shows L-3 SPS. Viking rates it for gates up to 60 ft and 1,600 lb, on 120 or 240 VAC single phase, 24 VAC/VDC or solar power. The H-10 is the larger model, rated for 75 ft and 2,200 lb. Check the LCD before ordering a motor or board.
Related models: Viking H-10
Operator and manuals
Most ordered parts
- Motor Viking L-3 - VNXL3MO (VNXL3MO)
- Conjunto de caja de alimentación modular Viking L-3 - VNXMPB (VNXMPB)
- Fusible Viking de 4 amperios - VNXF4A (VNXF4A)
- Batería Viking - DUBA12 (DUBA12)
- Sensor de posicionamiento electrónico Viking (EPS) - VNXSLEPS2 (VNXSLEPS2)
- Portaequipajes Viking VA-LR (VA-LR)
- Interruptor de alimentación Viking de 120 V CA - DUMRS10 (DUMRS10)
- Funda de operador Viking L-3 - VNXCV (VNXCV)
Parts list by assembly
Cover
| Part number | Part |
|---|---|
| VNXCV | Funda de operador Viking L-3 - VNXCV |
Main
| Part number | Part |
|---|---|
| DUBA12 | Batería Viking - DUBA12 |
| VNXL3MO | Motor Viking L-3 - VNXL3MO |
Power Box
Motor
| Part number | Part |
|---|---|
| VNXSLEPS2 | Sensor de posicionamiento electrónico Viking (EPS) - VNXSLEPS2 |
| VNXL3GB | Caja de cambios Viking L-3 - VNXL3GB |
| VA-LR | Portaequipajes Viking VA-LR |
Common questions
What size gate can the Viking L-3 run?
Viking rates the L-3 for gates up to 60 ft and 1,600 lb, with a 100% duty cycle.
What power can the L-3 use?
The main supply is 120 or 240 VAC single phase. Viking also lists 24 VAC/VDC (60VA) and solar as power options.
How do I move the gate by hand?
Lift the access door on the front of the cover and set the manual release switch to RELEASE. Set it back to ENGAGE for normal operation.