AES e-Loop Commercial Wireless Vehicle Sensor Manuals & Support
Identify your model
EL00C and EL00C-RAD: sensor only. EL00C-K and EL00C-RAD-K: kits with the ETRANS50 transceiver. The sensor mounts with dyna bolts.
Key specs
| Detection | 3-axis magnetometer; radar on RAD models |
|---|---|
| Radar | 60 degree field, 2 to 6.5 ft |
| Radio | 433.39 MHz, 128-bit AES |
| Transceiver | ETRANS50, 10 to 36 VDC, 1 A relay |
| Mode | Exit (EL00C), presence (EL00C-RAD) |
Manuals and documents
Installation Manual
-
e-Loop Commercial Instructions
View PDF: e-Loop Commercial Instructions (opens in a new tab) -
e-Loop Commercial Exit Mode (EL00C) Guide
View PDF: e-Loop Commercial Exit Mode (EL00C) Guide (opens in a new tab) -
e-Loop Commercial Presence Mode (EL00C-RAD) Guide
View PDF: e-Loop Commercial Presence Mode (EL00C-RAD) Guide (opens in a new tab)
Other documents
-
e-Loop Test Mode Guide
View PDF: e-Loop Test Mode Guide (opens in a new tab) -
e-Loop LED Displays Guide
View PDF: e-Loop LED Displays Guide (opens in a new tab)
Troubleshooting
Common questions
Use the EL00C for exit. Use the EL00C-RAD when the gate must stay open while a vehicle is over the sensor.
No. AES says not to use presence mode as a personal safety device.
Inside the operator or a weatherproof box. AES rates it for indoor use.