AES EL00C-K e-Loop Commercial Wireless Loop Kit - Exit Only
Manuals & Support · installation manuals, wiring diagrams and troubleshooting
AES EL00C-K e-Loop Commercial Wireless Loop Kit - Exit Only
Manuals & Support · installation manuals, wiring diagrams and troubleshooting
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
The AES EL00C-K is the e-Loop Commercial wireless vehicle detection kit for exit mode. It pairs the EL00C sensor with an ETRANS50 e-Trans 50 transceiver. The sensor bolts to the surface in the middle of the lane with dyna bolts, and vehicles drive over it. When a vehicle is detected, the sensor signals the transceiver, and the transceiver relay opens the gate. No saw cuts or trenching.
Detection uses a 3-axis magnetometer with auto-calibration. AES rates exit mode battery life at up to 10 years. The housing is 8.7 x 8.7 x 1.0 in (220 x 220 x 26 mm), weighs 2.2 lb (1,000 g), is rated IP68 and has a 10 tonne static load rating. It runs on 4 x 3.6 V replaceable lithium cells (2,700 mAh each). The radio link is 433.39 MHz with 128-bit AES encryption, with range up to 164 ft (50 m). Operating temperature is -4°F to 176°F. The ETRANS50 runs on 10-36 VDC per the AES data sheet and has one relay output (COM and N/O, 1 A) that wires to the open input of the gate operator.
What's Included
- EL00C e-Loop Commercial sensor (exit mode)
- ETRANS50 e-Trans 50 transceiver
- 2 x dyna bolts
Before You Order
- Complete kit. The EL00C listing is the sensor only, for adding a sensor to an existing e-Trans transceiver.
- Exit mode only, with no radar. It sends an open command when a vehicle passes; it does not hold the gate open while a vehicle sits on it. For presence detection, see the EL00C-RAD-K.
- The gate operator needs a dedicated open input with auto-close turned on.
- AES rates the ETRANS50 for indoor use. Mount it inside the operator or in a weatherproof plastic box.
- Do not mount near high-voltage cables. They can affect detection.
- Installation in 3 simple steps
1 - Code in e-Loop.
2 - Secure e-Loop to the driveway.
3 - Calibrate e-Loop ... and you're ready. to operate in less than 15 minutes. - Compact profile - only 8.6" x 1".
- Not affected by ground movement.
- 10600 mA battery giving up to 10 years battery life.
- High security 128 bit encryption.
- Range up to 50 meters.
- Made of high impact plastic (10 tonne static load limit)
- Frequency 433.39 MHz
- Modulation FSK
- Bitrate 9.6 kbps
- Bandwidth 250 kHz
- Antenna TypePCB
- Nominal Output Power10 dBm
- Receive Sensitivity-126.2 dBm
- Security 128-Bit AES Encryption
- Power 4 * 3.6 V 2700ma
- Dimensions 8.6*8.6*1 inches
- Weight 2.2 pounds
- Operating Temp-4°F to 176°F
- Standby Power14μA
- Activation Power50mA
- IP68 ingress protection
Manuals & Support: installation manuals, wiring diagrams and troubleshooting
Wireless vehicle detection for gate and barrier lanes where cutting a ground loop or trenching is not practical.
- Free exit on swing and slide gates
- Residential driveway gates
- Gated community entrances
- Business parks and shared access roads
- Warehouse and service yard gates
- Retrofits on finished driveways
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com