Identify your model
10LZRI30: LZR-I30 scanner. 10LBA: mounting bracket for LZR scanners. The 10REMOTE is needed for setup.
Key specs
| Field | Up to 30 x 30 ft, 4 curtains |
|---|---|
| Power | 10 to 35 VDC, under 5 W |
| Outputs | 2 electronic relays, 35 VDC / 24 VAC, 80 mA |
| Housing | IP65, NEMA 4 |
| Response | About 20 ms |
Manuals and documents
Installation Manual
-
LZR-I30 User Guide
View PDF: LZR-I30 User Guide (opens in a new tab)
Programming Guide
-
BEA Universal Remote Control Guide
View PDF: BEA Universal Remote Control Guide (opens in a new tab)
Spec Sheet
-
LZR-I30 Data Sheet
View PDF: LZR-I30 Data Sheet (opens in a new tab) -
LZR-I30 Architectural Specification
View PDF: LZR-I30 Architectural Specification (opens in a new tab)
Other documents
-
LZR Center Mount Application Note
View PDF: LZR Center Mount Application Note (opens in a new tab) -
Monitoring by Voltage Application Note
View PDF: Monitoring by Voltage Application Note (opens in a new tab) -
NEMA 4 Laser Scanner Comparison
View PDF: NEMA 4 Laser Scanner Comparison (opens in a new tab) -
Case Study: Reducing Door Strikes
View PDF: Case Study: Reducing Door Strikes (opens in a new tab)
Troubleshooting
Common questions
The BEA 10REMOTE universal remote.
A SELV 10 to 35 VDC supply. BEA lists the 10PSMDR2024 and 10PSST242.
Yes. The housing is IP65 / NEMA 4.