BEA UL Listed Maglocks, 600 and 1,200 lb Manuals & Support

BEA 10MAGLOCK1UL / 3UL / 5UL / 6UL / 1ULDS

BEA maglocks are surface mount electromagnetic locks for access control and egress doors. They run on 12 or 24 VDC and hold the door until power is cut.

A lock status sensor with LED gives an output. Relock delay adjusts from 0 to 90 seconds. The DS model adds a door status sensor.

Buy the 10MAGLOCK1UL / 3UL / 5UL / 6UL / 1ULDS (5 options)

Identify your model

10MAGLOCK3UL and 6UL: 600 lb single and double. 10MAGLOCK1UL and 5UL: 1,200 lb single and double. 10MAGLOCK1ULDS: 1,200 lb single with door status. 10MAGLOCK1, 3, 5 and 6: earlier non-UL listings.

Key specs

Holding force 600 or 1,200 lb per door
Power 12 or 24 VDC
Listing UL 294 (UL models)
Relock delay 0 to 90 s
Status output 1 A at 24 VDC
Temperature 32 to 120 F

Manuals and documents

Installation Manual

Spec Sheet

Other documents

Troubleshooting

Lock does not hold

  • Check the supply voltage at the lock.
  • Check that the armature plate meets the magnet flat.
  • Clean the magnet and armature faces.

Door does not release

  • Check that the release device cuts power to the lock.
  • Check the relock delay setting.

Common questions

A UL listed 12 or 24 VDC supply, such as the BEA 10PS12-24.

The 6UL (600 lb) and 5UL (1,200 lb).

No. L, Z and U brackets are separate.