BEA 10MAGLOCK6UL: 600lb Double UL Listed Maglock

BEA ITEM: 10MAGLOCK6UL
BEA 10MAGLOCK6UL: 600lb Double UL Listed Maglock
BEA 10MAGLOCK6UL: 600lb Double UL Listed Maglock

BEA 10MAGLOCK6UL: 600lb Double UL Listed Maglock

BEA ITEM: 10MAGLOCK6UL
Regular price $208.00
/
  • Free shipping on most items over $200
  • We have 15+ years of industry experience
  • GSA, Net 30 and purchase orders available
Shipping calculated at checkout.

Description

BEA 10MAGLOCK6UL: 600lb Double UL Listed Maglock

Double 600 lb electric lock

BEA’s UL LISTED MAGLOCKS provide a standards compliant locking solution for retail, healthcare, banking and other high security facilities that require UL Listed security products. maglocks can be used on hollow metal, wood, aluminum, glass and composite door materials. The UL LISTED MAGLOCKS are available in surface mount single or double door configurations, with holding force of 600. These locks include adjustable zero to 90 second relock time delay and a lock status sensor with visible LED.

  • User-Configurable

  • Enhanced Access Control / Monitoring

  • UL 294 Listed Models Available

  • Anti-Tampering

Can I use a transformer and a rectifier to power a MAGLOCK?

No. UL MAGLOCKS must be powered from a UL-listed, regulated, power-limited, power supply.

I have an all-glass, swing door. How do I mount the armature plate?

Use the U-Bracket (10UBRACKETUL) to mount the armature to the swing door.

How do I mount a MAGLOCK to be used on the pull side of a swing door?

Use the L and Z bracket kit:
600lb single = 10LZBRMAG3UL
1200lb single = 10LZBRMAG1UL
600lb double = 10MAG6LZUL
1200lb double = 10MAG5LZUL

Why is the lock not releasing after I connect my Push-to-Exit switch to the COM. and N.O. terminals on the terminal strip?

That is a Lock Status relay that switches state when the bond occurs; not a lock release.

Why will the MAGLOCK not bond to the armature even though the red LED is on?

Verify that your power supply has sufficient amperage. Verify that you have the correct power supply; it must be a UL-listed, regulated, power-limited, power supply.

Why is the bond between the MAGLOCK and the armature plate weak?

Verify the amperage. If the power is good, remove the spring-loaded button attached to armature plate.
Verify that the armature plate is properly aligned with the MAGLOCK body.

Can I replace only the board of the MAGLOCK body?

No. The entire MAGLOCK assembly must be replaced.

What is the default voltage for the jumpers?

24 VDC

Why won’t the LED turn Green?

1. The armature plate is too tight on door.
2. The armature plate is out of alignment.
3. The wrong power supply is being used.

What does the potentiometer do?

For setting a re-locking delay (up to 90 seconds) when using a momentary switch to release the lock.

All in stock orders typically ship the same business days or within 1-2 business days.  Cut off for same day shipping is 2:30PM Central Time.

LEADTIME

Items with lead times typically ship in 4-7 business days.

FREE SHIPPING POLICY

Orders with free shipping may have longer lead times due to those items being shipped the most economical way.  Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items

Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.

Read return policies

Protec Controls accepts purchase orders please contact us.

NET 30

We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.

GOVERNMENT & GSA

Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Reviews