Linear MegaCode MGR Receivers and AP-5 Controller Manuals & Support

Linear MGR / MGR-2 / AP-5

The Linear MGR and MGR-2 are 1 and 2 channel MegaCode gate receivers that mount in the operator and power from it. A remote antenna kit is included.

The AP-5 is a wireless access controller for one or two doors or gates. It stores up to 480 MegaCode remotes and supervises MGT edge transmitters.

Buy the MGR / MGR-2 / AP-5 (3 options)

Identify your model

MGR (DNR00104): 1 channel. MGR-2 (DNR00105): 2 channel. AP-5 (ACP00953): 3 relay access controller with built-in receiver.

Key specs

Radio MegaCode, 318 MHz
MGR memory 40 transmitters
MGR power 12 to 30 VAC or 10.5 to 30 VDC
MGR relays Form A, 5 A
AP-5 memory 480 remotes, 238 blocks, 6 MGT edges
AP-5 relays 3 Form C, 1 A

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Remote does not work

  • Check the battery and the LED on the remote.
  • Program the remote to the receiver again.
  • Check that the remote and the receiver use the same radio type.

Short range

  • Move the antenna away from metal and mount it high.
  • Check for a weak battery.

Common questions

No. These are MegaCode receivers.

Use the bulkhead connector to mount the antenna outside a metal operator housing.

Yes. Channel 1 can open and channel 2 can close.

Buy the Linear MegaCode MGR Receivers and AP-5 Controller

Linear MGR MegaCode 1-channel gate receiver
Linear Megacode MGR: 1-Channel Gate Receiver
Linear Megacode
Linear MGR-2 MegaCode 2-channel gate receiver
Linear Megacode MGR-2: 2-Channel Gate Receiver
Linear Megacode
Linear AP-5 MegaCode wireless access controller
Linear Megacode AP-5: Wireless Receiver
Linear Megacode

Safety devices and accessories

Linear EXA-1000 omni-directional remote antenna
Linear EXA-1000: Omni-directional Remote Antenna
Linear