Seco-Larm E-960 Twin Photobeam Detectors Manuals & Support
Identify your model
The number is the outdoor range: D90 is 90 ft, D190 is 190 ft, D290 is 290 ft. GQ models have a monitored output. The E-960ACC-CVR is the replacement cover.
Key specs
| Outdoor range | D90: 90 ft; D190: 190 ft; D290: 290 ft |
|---|---|
| Beams | Twin |
| Operating voltage | 12 to 30 VAC or VDC, non-polarized |
| Current draw | 150 mA max (D90GQ) |
| Output | SPDT relay, 1 A at 30 VAC/VDC |
| Monitoring | D90GQ: N.C. or 10k ohm |
| Alignment | Built-in laser |
| Operating temperature | -13 to 131 °F |
Manuals and documents
Installation Manual
-
E-960-D90GQ Installation Manual
View PDF: E-960-D90GQ Installation Manual (opens in a new tab) -
E-960 and E-964 Twin Photobeam Manual
View PDF: E-960 and E-964 Twin Photobeam Manual (opens in a new tab) -
E-960-D90Q Installation Manual
View PDF: E-960-D90Q Installation Manual (opens in a new tab)
Spec Sheet
-
E-960-D90GQ Spec Sheet
View PDF: E-960-D90GQ Spec Sheet (opens in a new tab) -
E-960 Series Twin Photobeam Spec Sheet
View PDF: E-960 Series Twin Photobeam Spec Sheet (opens in a new tab)
Troubleshooting
Common questions
Both beams must be blocked at once, so small objects like leaves or birds do not cause alarms.
It is a perimeter detector. For UL 325 gate entrapment protection use a monitored photo eye listed for the operator.
Use the built-in laser to line up the transmitter and receiver, then fine tune with the LEDs.