Seco-Larm E-960-D90Q Twin Photobeam Detectors, 90 FT Outdoors, 190 FT Indoors
Manuals & Support · installation manuals, wiring diagrams and troubleshooting
Seco-Larm E-960-D90Q Twin Photobeam Detectors, 90 FT Outdoors, 190 FT Indoors
Manuals & Support · installation manuals, wiring diagrams and troubleshooting
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
The Seco-Larm Enforcer E-960-D90Q is a twin photobeam detector with a range of 90 ft outdoors and 190 ft indoors. It runs on 10-30 VAC/VDC through non-polarized inputs and draws 53 mA.
Both beams must break at the same time to trigger, which cuts nuisance alarms from birds and falling leaves. The alarm output is an NO/NC relay rated 1 A at 120 VAC with a 1 second minimum hold, and the tamper output is an N.C. switch. A built-in laser speeds alignment, interruption time is adjustable from 50 to 700 ms, and the IP55 sunlight-filtering case suits indoor or outdoor use. Operating temperature is -13 to 131 °F.
Before You Order
- Each end needs 10-30 VAC/VDC power.
- The relay output is not a monitored (10K ohm) output. For a UL 325 monitored version, see the E-960-D90GQ.
- Longer-range versions: E-960-D190Q (190 ft) and E-960-D290Q (290 ft).
- Replacement cover: E-960ACC-CVR.
- Built-in laser beam alignment system speeds accurate, reliable positioning
- Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
- Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
- Weatherproof (IP55), sunlight-filtering case for indoor & outdoor use
- Anti-frost system so that beam functions even in extreme conditions
- Automatic input power filtering with special noise rejection circuitry
- NC/NO alarm output
- N.C. tamper circuit included
- Non-polarized power inputs
- Quick, easy installation with built-in laser beam alignment system
- Response time adjustable for nearly all situations
- Response time is set at the factory to the shortest time (50ms)
- Type: Twin Photobeam Detectors with Laser Beam Alignment
- Current Draw: 64 mA max.
- Sensing Range: Outdoor- 90 ft (30 m), Indoor- 190 ft (60 m)
- Operating Voltage: 10 - 30 VAC/VDC (Non-polarized)
- IP Rating: Weatherproof IP55
- Interupt Speed: 50msec - 700msec (variable)
- LEDs - Red: ON indicates transmitter and receiver not aligned or beam is broken
- LEDs - Yellow: ON indicates weak receiver signal or beam is broken
- LEDs - Green: ON indicates unit connected to power
- Detection System: Simultaneous break of 2 beams
- Alarm Output: NO/NC relay, 1 A @ 120 VAC, min. 1 sec.
- Tamper Output: NC. switch, 1 A @ 120 VAC
- Case material: PC Resin
- Laser Wavelength: 650 nm
- Operating Temperature: -13 to 131°F (-25 to 55°C)
- Laser Output Power: 5 mW
- Alignment Angle: Horizontal (+/-)90°, Vertical: (+/-)5°
- Weight: 2.5 lb (1.1 kg)
Dimensions
- Front: 2.9 in (74 mm) W x 6.8 in (173 mm) H
- Pole Mounting: Back to back on a 43ST pole; each unit 2.8 in (72 mm) deep
Manuals & Support: installation manuals, wiring diagrams and troubleshooting
Long-range through-beam detector for indoor and outdoor perimeter protection.
- Outdoor perimeter protection
- Fence lines and property boundaries
- Warehouse and yard perimeters
- Long indoor corridors
- Alarm panel zone inputs
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com