Seco-Larm E-960-D90GQ Monitored Twin Photobeam Detector 90FT

Seco-Larm ITEM: E-960-D90GQ
Seco-Larm E-960-D90GQ Monitored Twin Photobeam

Seco-Larm E-960-D90GQ Monitored Twin Photobeam Detector 90FT

Seco-Larm ITEM: E-960-D90GQ
Regular price $95.00
/
  • Current Trade Policy Costs Included In Price
  • In Cart Discounts Offered on Many Products
  • GSA, Net 30 and purchase orders available
Shipping calculated at checkout.

Description

The Seco-Larm Enforcer E-960-D90GQ is a monitored twin photobeam detector with a range of 90 ft outdoors and 190 ft indoors. It runs on 12-30 VAC/VDC through non-polarized inputs and draws up to 150 mA in operation. Seco-Larm lists it as ETL UL 325 compliant.

Both beams must break at the same time to trigger, which cuts nuisance alarms from birds and falling leaves. The trigger output is an SPDT relay rated 1 A at 30 VAC/VDC with a built-in 10K ohm resistor on the N.O. contact for monitored inputs. A built-in laser speeds alignment, and the transmitter and receiver each have an N.C. tamper switch. Lensed optics and automatic beam-strength adjustment help in rain, snow and mist. Operating temperature is -13 to 131 °F.

What's Included

  • Transmitter and receiver
  • U brackets for pole mounting

Before You Order

  • Confirm your gate operator or control board accepts a 10K ohm monitored photo eye input.
  • Each end needs 12-30 VAC/VDC power.
  • Replacement cover: E-960ACC-CVR.
  • Non-monitored versions: E-960-D90Q (90 ft), E-960-D190Q (190 ft) and E-960-D290Q (290 ft).
  • Twin beams minimize false alarms from falling leaves, birds, etc.
  • Lensed optics reinforces beam strength and provides excellent immunity to false alarms due to rain, snow, mist, etc.
  • Weatherproof (IP55), sunlight-filtering case
  • Non-polarized power inputs
  • Anti-frost system
  • Automatic input power filtering with special noise rejection circuitry
  • NO/NC trigger output
  • N.C. tamper circuit included
  • “U” brackets included for pole mounting
  • Quick, easy installation with built-in laser beam alignment system
  • Monitored output: N.C. or 10kΩ resistor on N.O. output
  • Type: Twin Photobeam Detector with Laser Beam Alignment
  • Current Draw: 50 mA max (laser align only). 150 mA max. (active operation excluding laser alignment)
  • Sensing Range: Outdoor - 90 ft (30 m), Indoor- 190 ft (60 m)
  • Operating Voltage: 12 - 30 VAC/VDC 60 Hz, 200 mA
  • IP Rating: IP55 Weatherproof
  • Interupt Speed: 10 ms
  • LEDs - Red: ON indicates transmitter and receiver not aligned or beam is broken
  • LEDs - Yellow: ON indicates weak receiver signal or beam is broken
  • LEDs - Green: ON indicates unit connected to power
  • Alarm Output: SPDT NO/NC/COM relay, 1 A @ 30 VAC/VDC
  • Tamper Output: N.C. switch, 1 A @ 30 VAC/VDC
  • Case material: PC Resin
  • Laser Wavelength: 650 nm
  • Operating Temperature: -13 to 131°F (-25 to 55°C)
  • Laser Output Power: <5 mW
  • Alignment Angle: Horizontal (+/-)90°, Vertical: (+/-)5°
  • Weight: 2.5 lb (1.1 kg)

Dimensions

  • Front: 2 15/16 in (74 mm) W x 6 13/16 in (173 mm) H
  • Side: 2 15/16 in (74 mm) D
Seco-Larm E-960-D90GQ Monitored Twin Photobeam Detector 90FT - Technical information

Monitored twin photobeam for gate entrapment protection and long-range perimeter sensing.

  • Residential driveway gates
  • Commercial slide and swing gates
  • Outdoor perimeter protection
  • Fence lines and property boundaries
  • Alarm panel zone inputs

All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.

LEADTIME

Items with lead times typically ship in 4-7 business days.

FREE SHIPPING POLICY

Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items

Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.

Read return policies

Protec Controls accepts purchase orders please contact us.

NET 30

We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.

GOVERNMENT & GSA

Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com

Recommended Accessories


You may also like

Reviews