TransCore Encompass 4 RFID Readers Manuals & Support

TransCore 10-4002 / 10-4004 series

The TransCore Encompass 4 is a UHF RFID reader for vehicle access. It reads windshield tags in the 902 to 928 MHz band and connects to the access system by RS-232, RS-422 or Wiegand.

It runs on 16 to 20 VAC or 16 to 28 VDC. RF output adjusts from 2 W down to 200 mW. It has two sense inputs and two Form C relays in a tamper resistant housing.

Buy the 10-4002 / 10-4004 series (11 options)

Identify your model

The part number sets the tag protocol and interface: for example 10-4002-001 SeGo with RS-232/Wiegand, 10-4004-008 ATA with RS-422. Older listings call it SmartPass 4.

Key specs

Frequency 902 to 928 MHz
Power 16 to 20 VAC or 16 to 28 VDC
RF output 200 mW to 2 W
I/O 2 sense inputs, 2 Form C relays
Size 15.5 x 15.5 x 3.25 in, 9.5 lb
Operating temperature -40 to 131 °F

Manuals and documents

Installation Manual

Quick Start

Spec Sheet

Troubleshooting

Tags not read

  • Check the reader protocol matches the tags.
  • Raise the RF output and check the aim.

Reader dead

  • Check the transformer or DC supply and the connector cable.

Common questions

It depends on the part number: SeGo, eGo, ATA or IAG. Match the reader to your tags.

No. Order a 58-1620 connector cable kit, 5, 20, 35 or 45 ft.

US operation requires an FCC Part 90 site license.