BD LOOPS BD-LS Loop Shield Sealant - BLACK

BD Loops ITEM: BD-LS Black
BD Loops BD-LS Loop Shield Sealant Black
BD Loops BD-LS Loop Shield Sealant Black - view 2
BD Loops BD-LS Loop Shield Sealant Black - view 3
BD Loops BD-LS Loop Shield Sealant Black - view 4
BD Loops BD-LS Loop Shield Sealant Black - view 5
BD Loops BD-LS Loop Shield Sealant Black - view 6
BD Loops BD-LS Loop Shield Sealant Black
BD Loops BD-LS Loop Shield Sealant Black - view 2
BD Loops BD-LS Loop Shield Sealant Black - view 3
BD Loops BD-LS Loop Shield Sealant Black - view 4
BD Loops BD-LS Loop Shield Sealant Black - view 5
BD Loops BD-LS Loop Shield Sealant Black - view 6

BD LOOPS BD-LS Loop Shield Sealant - BLACK

BD Loops ITEM: BD-LS Black
/
  • Current Trade Policy Costs Included In Price
  • In Cart Discounts Offered on Many Products
  • GSA, Net 30 and purchase orders available
  • 1361 In-Stock & ready to ship
Shipping calculated at checkout.

Description

BD Loops BD-LS Loop Shield is a one-part, moisture-curing, self-leveling MS polymer hybrid sealant in black. It seals inductance loop wire in saw-cut grooves in concrete, asphalt, and other surfaces. Sold per 30 fl oz rigid plastic tube.

BD-LS is 100% solids with no solvents, so it does not shrink or dip after it cures. It goes on damp or dry surfaces and does not bubble when exposed to water. The cured seal stays flexible as the joint expands and contracts. It is UV and weather resistant, paintable, and resists yellowing. Skin-over time is about 45 minutes at 70°F and 50% relative humidity, and strength keeps building for 7 days. Traffic can cross right away if the groove is left slightly underfilled. VOC and California Prop 65 compliant. Made in the USA.

What's Included

  • (1) 30 fl oz tube of BD-LS Loop Shield Sealant, black
  • (1) flat sealant tip

Before You Order

  • Coverage per tube: about 20 ft in a 3/16 in x 1-1/4 in deep groove, 16 ft at 1-1/2 in deep. In a 1/4 in wide groove, about 15 ft at 1-1/4 in deep and 12 ft at 1-1/2 in deep.
  • A 3/16 in blade and BD Loops 3/16 in preformed saw-cut loops use about 25% less sealant than a 1/4 in cut. Order one extra tube rather than run short on the job.
  • Fill the groove in one pass from the bottom up with the flat tip.
  • Not for freezing conditions. Minimum application temperature is 32°F, and cure slows as it gets colder. For cold-weather work, see the BD-LG2 two-part sealant.
  • Uses a 30 fl oz caulk gun. BD Loops offers the BD-LS-GUN dripless gun.
  • Also available in gray.
  • Self leveling.
  • 100% Solids, will not shrink. No solvents.
  • UV and weathering resistant.
  • Does not bubble when exposed to water.
  • Can be applied to damp/wet surfaces.
  • Flat Sealant tip included with each tube of sealant.
  • Seal the groove in 1 pass from the bottom up!
  • 30 fl oz. rigid plastic tube.
  • V.O.C. and California Prop 65 compliant.
  • Paintable.
  • Resists yellowing.
  • Made in the USA.
  • Surface Preparation: Surface should be clean. Alcohol can be used to clean the surface if necessary. Priming is not required.
  • Application: Cut the tip off the cartridge just above the nozzle threads. Thread the sealant tip onto the cartridge and place it in a quart size caulking gun. Apply from the bottom of the saw-cut groove. Slightly underfill the groove to within 1/8 in (3.12 mm) of the surface so vehicles do not track the sealant. Do not use the high speed setting on powered dispensing guns.
  • Storage: Store in a dry, cool, well-ventilated place. 1 year shelf life from date of manufacture.
  • Packaging: 30 fl oz rigid plastic caulking cartridges, compatible with standard quart tube caulking guns
  • Curing: Skins over in approximately 45 minutes at 70°F (21°C) and 50% relative humidity. Temperatures below 32°F (0°C) and/or low humidity slow skin and cure time. Strength starts to develop immediately and keeps increasing for 7 days after application. If the groove is slightly underfilled, traffic is permitted immediately after application. Not designed for installation in freezing temperatures; use BD-LG2 for cold weather installations.
  • Spills / Clean Up: Wet BD-LS can be cleaned up with rubbing alcohol. Dry BD-LS can be removed by abrading or scraping.
  • Safety and Handling: Refer to the Safety Data Sheet for BD-LS

Physical Properties (typical, not specifications)

  • Viscosity: 40,000 cps (Spindle 7, 4 rpm)
  • Colors: Gray or Black
  • Solids: 100%
  • Hardness, Shore A (ASTM C-661): 25
  • Elongation (ASTM D-412): 300%
  • Tensile Strength (ASTM D-412): 1.33 MPa
  • Lap Shear (ASTM D-412): N/A
  • QUV Testing (ASTM G-26): Pass (4,000 hrs)

Coverage

  • 3/16 in wide blade/groove, 1¼ in depth: 20 ft per cartridge, 240 ft per case
  • 3/16 in wide blade/groove, 1½ in depth: 16 ft per cartridge, 192 ft per case
  • 1/4 in wide blade/groove, 1¼ in depth: 15 ft per cartridge, 180 ft per case
  • 1/4 in wide blade/groove, 1½ in depth: 12 ft per cartridge, 144 ft per case

BD Loops Resource Center

BD Loop Shield Literature

Loop Goop Info

Loop Goop MSDS

Sealant Needed Calculator

BD LOOPS BD-LS Loop Shield Sealant - BLACK - Resources

One-part sealant for inductance loop wire in saw-cut slots in concrete, asphalt, pavers and brick.

  • Sealing saw-cut loop slots in concrete
  • Sealing saw-cut loop slots in asphalt
  • Loop slots in paver stone and brick
  • Gate and door vehicle detection loops
  • Lanes that reopen to traffic right away

BD Loops Saw-Cut Loop Installation Guide (PDF)

All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.

LEADTIME

Items with lead times typically ship in 4-7 business days.

FREE SHIPPING POLICY

Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items

Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.

Read return policies

Protec Controls accepts purchase orders please contact us.

NET 30

We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.

GOVERNMENT & GSA

Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com

Recommended Accessories
You may also like
More from Loop Sealant
BD Loops BD-LG2 Two-Part Loop Sealant
BD Loops BD-LG2 Two-Part Loop Sealant - view 2
BD LOOPS BD-LG2 Two component polyurethane, detector loop, runway light sealant
BD Loops
Sale
BD Loops BD-LS Loop Shield Sealant Gray
BD Loops BD-LS Loop Shield Sealant Gray - view 2
BD LOOPS BD-LS Loop Shield Sealant - GRAY
BD Loops
BD Loops Loop Goop Sealant Black
BD Loops Loop Goop Sealant Black - view 2
BD LOOPS Loop Goop - Black **REPLACED BY LOOP SHIELD SEALANT**
BD Loops
BD Loops Loop Goop Sealant Gray
BD Loops Loop Goop Sealant Gray - view 2
BD LOOPS Loop Goop - Gray **REPLACED BY LOOP SHIELD SEALANT**
BD Loops
Sold Out
Bondo P-606 loop sealant gallon can
Bondo P606 Loop Sealant - Gallon Can w/ 2 tubes liquid hardener ***Discontinued***
Bondo / 3M
More from BD Loops
BD Loops 3/16 in Pro Diamond Saw Blade 14 in
BD Loops 3/16 in Pro Diamond Saw Blade 14 in - view 2
BD Loops 3/16" Pro Diamond Blades 14" Diameter
BD Loops
BD Loops BD-LG2 Two-Part Loop Sealant
BD Loops BD-LG2 Two-Part Loop Sealant - view 2
BD LOOPS BD-LG2 Two component polyurethane, detector loop, runway light sealant
BD Loops
Sale
BD Loops BD-LS Loop Shield Sealant Gray
BD Loops BD-LS Loop Shield Sealant Gray - view 2
BD LOOPS BD-LS Loop Shield Sealant - GRAY
BD Loops
BD Loops BD-LS-GUN Loop Sealant Dispensing Gun
BD Loops BD-LS-GUN Dripless 30 oz Loop Sealant Dispensing Gun for BD-LS
BD Loops
BD Loops BD-Megger Analog Megohmmeter Loop Tester
BD Loops BD-Megger Analog Megohmmeter Loop Tester - view 2
BD Loops BD-Megger Analog Megohmmeter Loop Tester
BD Loops

Reviews

Back to BD Loops