Seco-Larm E-931-S33PRGQ Polarized Reflective Eye with Reflector *Replaces SEA E- 931S33PRQ

Seco-Larm ITEM: E-931-S33PRGQ
Seco-Larm E-931-S33PRGQ Polarized Reflective Photo Beam

Seco-Larm E-931-S33PRGQ Polarized Reflective Eye with Reflector *Replaces SEA E- 931S33PRQ

Seco-Larm ITEM: E-931-S33PRGQ
Regular price $92.50
/
  • Current Trade Policy Costs Included In Price
  • In Cart Discounts Offered on Many Products
  • GSA, Net 30 and purchase orders available
Shipping calculated at checkout.

Description

The Seco-Larm Enforcer E-931-S33PRGQ is a polarized retro-reflective photo beam with a sensing range of up to 33 ft. It runs on 12-30 VAC/VDC and draws 55 mA in standby and 40 mA when active at 12 VDC.

The polarized optics trigger only on correctly reflected light, so shiny vehicles and objects do not fool the sensor. The trigger output is an SPDT relay rated 0.5 A at 30 VAC/VDC with a built-in 10K ohm resistor on the N.O. contact for monitored inputs, and an N.C. tamper switch is rated 500 mA. A beam status LED shows signal quality. The IP55 anti-condensation housing measures 4-13/16 x 2-3/8 x 2-7/16 in and works from -4 to 131 °F.

What's Included

  • Sensor
  • 3-1/4 in (82 mm) round reflector
  • Hoods for the sensor and reflector

Before You Order

  • Confirm your gate operator or door control accepts a 10K ohm monitored photo eye input.
  • Needs 12-30 VAC/VDC power.
  • Red cover: E-931ACC-CVR/R.
  • Replaces the E-931-S33PRQ.
  • Polarized sensor is immune to shiny objects: triggers only when correctly reflected light is detected
  • Weatherproof (IP55)
  • Anti-condensation housing
  • 12-30V DC/AC 60Hz, 100mA
  • Up to 33ft (10m) sensing range
  • Round reflector, Diameter: 3-1/4″ (82mm)
  • Form C relay: 500mA@30VAC/VDC
  • Beam status LED
  • Compact size: 4-13/16″x2-3/8″x2-7/16″ (122x60x62mm)
  • N.C. Tamper switch: 500mA@30VAC/VDC
  • Monitored Outputs: N.C., 10kΩ Resistor
  • Hood included for both sensor and reflector
  • Type: Polarized reflective photoelectric beam sensor
  • Current Draw: Standby: 55 mA @ 12 VDC, Active: 40 mA @ 12 VDC
  • Sensing Range: Up to 33 ft (10 m)
  • Operating Voltage: 12 - 30 VAC/VDC 60 Hz, 100 mA
  • Reaction time: 10 ms
  • IP Rating: Weatherproof IP55
  • Light Source: IR LED, wavelength 740 nm
  • LEDs - Red: Solid: no beam signal, triggered
  • LEDs - Green: Solid: good beam signal, properly aligned
  • LEDs: Alternating flash: poor beam signal
  • Alarm Output: SPDT relay output (NO/NC/COM)
  • Switching Capacity: 500 mA @ 30 VAC/VDC
  • Tamper Switch: N.C., 500 mA @ 30 VAC/VDC
  • Operating Temperature: -4 to 131°F (-20 to 55°C)

Dimensions

  • Sensor: 4 13/16 in (122 mm) H x 2⅜ in (60 mm) W x 2 7/16 in (62 mm) D
  • Reflector: Ø3¼ in (82 mm) x ⅜ in (9 mm); center hole Ø3/16 in (4 mm)
  • Reflector Hood: Ø4 in (102 mm) x 2 5/16 in (59 mm)
Seco-Larm E-931-S33PRGQ Polarized Reflective Eye with Reflector *Replaces SEA E- 931S33PRQ - Technical information

Monitored retro-reflective photo beam for gate and door entrapment protection and entry sensing.

  • Residential driveway gates
  • Commercial slide and swing gates
  • Garage and overhead doors
  • Storefront entry alerts
  • Parking distance assist
  • Alarm system triggers

All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.

LEADTIME

Items with lead times typically ship in 4-7 business days.

FREE SHIPPING POLICY

Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items

Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.

Read return policies

Protec Controls accepts purchase orders please contact us.

NET 30

We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.

GOVERNMENT & GSA

Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com

Recommended Accessories


You may also like

Reviews