Seco-Larm SH-816S Self-Contained Siren and Siren/Strobe Manuals & Support
Identify your model
SH-816S-SQ/x has a strobe lens: /A amber, /B blue, /C clear, /R red. SH-816S-BQ has no strobe. The SH-816S-SLQ is the replacement lens. The 4-in-1 message model is the SH-816S-SMQ.
Key specs
| Siren | 120 dB warble tone |
|---|---|
| Speaker | 25 W peak, audio input |
| Operating voltage | 9 to 15 VDC |
| Current draw at 12 VDC | Siren 680 mA; strobe 190 mA; both 870 mA |
| Strobe | 100 flashes per minute (SQ only) |
| Tamper output | 100 mA at 30 VAC/VDC |
| IP rating | IP65 |
| Operating temperature | -4 to 131 °F |
Manuals and documents
Installation Manual
-
SH-816S-BQ and SH-816S-SQ Installation Manual
View PDF: SH-816S-BQ and SH-816S-SQ Installation Manual (opens in a new tab) -
SH-816S-SQ Manual, Earlier Edition
View PDF: SH-816S-SQ Manual, Earlier Edition (opens in a new tab)
Spec Sheet
-
SH-816S Siren/Strobe Spec Sheet
View PDF: SH-816S Siren/Strobe Spec Sheet (opens in a new tab)
Troubleshooting
Common questions
Yes. Connect an audio source to the speaker input. The broadcast overrides the siren while it plays.
Yes. The strobe has its own trigger terminal.
Amber, blue, clear and red. Replacement lenses are the SH-816S-SLQ series.