DIABLO DSP-55, MINI LOOP KIT, 75'
DIABLO DSP-55, MINI LOOP KIT, 75'
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
The Diablo Controls DSP-55-75 mini loop kit pairs the DSP-55 plug-in detector with a Diablo Free Exit Probe (mini-loop) on a 75 ft lead-in. The probe is buried in a small vertical hole instead of a saw-cut loop, so it suits gravel, dirt, pavers, cobblestone and poor pavement. It runs on 8 to 35 VDC, a range Diablo gives for low voltage solar installs, and has a 10-pin Molex connector. Three solid-state FET outputs (A, B and B inverted) are rated 250 mA at 30 V.
Output B can be presence, entry pulse, exit pulse or fail. A 10-position rotary switch sets sensitivity (factory 5), with four loop frequencies, sensitivity boost, and a fail-safe or fail-secure DIP switch. In Free Exit Probe mode the detector always gives an entry pulse. Loop inductance range is 20 to 1500 µH. It operates from -35°F to 165°F.
What's Included
- DSP-55 plug-in detector
- Diablo Free Exit Probe (mini-loop) with 75 ft lead-in
Before You Order
- Free exit only. The probe gives an entry pulse and cannot be used as a safety or obstruction sensor.
- Lead-in length sets the maximum distance from the probe to the control box. Diablo also makes a 100 ft kit.
- The DSP-55 is DC only and has solid-state outputs. Use a Diablo RK-1R rack if the operator needs a relay contact.
Results in the opportunity for greatly increased service life due to the reduced exposure to hazards such as road traffic, pavement movement, pavement deterioration, and roadwork.
The fact that the “Mini-Loop” is not installed in the pavement and that the lead-in is very durable allows the “Mini-Loop” to be used in situations such as cobblestone pavements, poor pavements, dirt/gravel roads, and bridge decks.
Minimal intrusion into good pavements!
- Product Type: Mini loop kit: plug-in detector with Free Exit Probe
- Model: DSP-55-75
- Power: 8 to 35 VDC
- Detection: Free Exit Probe (mini-loop) or inductive loop; three solid-state outputs, 250 mA at 30 V
- Mounting: Detector: plug-in, 10-pin Molex. Probe: buried vertically in a cored hole
- Dimensions: Detector 2.375 x 2.24 x 0.86 in; 75 ft probe lead-in
- Operating Temperature: -35°F to 165°F
Installation is straightforward. A 1-in. diameter hole (18-in to 24-in. deep) is drilled for the “Mini Loop”. A shallow, 1/4-in. saw cut from the hole to the edge of the road provides a path for the lead-in wire.
The “Mini-Loop” with lead-in is inserted into the hole and the hole is filled with dry sand. Detector loop sealant material is then used to fill the slot and top portion of the hole.
It is important that the “Mini-Loop” be installed in a vertical position and that the vertical position of the “Mini-Loop” be maintained.
Under some soil conditions, installation can be further simplified by installing the Mini-Loop inside a length of PVC pipe (not steel pipe) with an interior diameter of about 1 inch.
In this case, the hole must be slightly larger than the outside diameter of the PVC pipe, typically 1-5/8-in. or less.
After insertion of the PVC pipe and Mini-Loop, all cavities are back-filled with fine, dry sand and the installation completed in the normal manner.
Free exit detection with a buried mini-loop probe where a saw-cut loop is not practical.
- Gravel and dirt driveways
- Pavers and cobblestone drives
- Poor or cracked pavement
- Free exit on residential gates
- Retrofit free exit without saw cutting
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com
