Linear Multicode 1099 50 Safety Edge Receiver

The MCS1099-50 and the MCS302850 are two auto sensing Multi-Code or Stanley compatible format gate receivers. They eliminate any chance of damage to either the gate operator or themselves from running off the wrong voltage. Nearly all gate orperators offer either 24 or 12 volts AC or DC as accessory power. Because these two receivers are auto sensing, each recognizes the gate operator's correct voltage. As a result, installers can be assured of always having the correct model gate receiver on the truck.

The two receivers can operate from 12-30 volts AC or 10.5-30 volts DC and are normally powered from the gate operator. Their relay contact(s) are rated at 30 VAC/DC up to 5 Amps.

The two receivers both support transmitters that use the Multi-Code format (300 MHz), as well as the Stanley compatible (310 MHz) format. Both formats support 1,024 system codes for the MCS109950 and 512 system codes for the MC302850 (system codes are easy to set via dip switches).

The MCS109950 has a single relay and replaces three different Multi-Code gate receivers, the MCS109930, the MCS109940, and the MCS109931. It is designed for use with automatic gate operators or systems where a remote antenna is needed.

Features:

Dual frequency - Multi-Code or Stanley compatible; jumper selectable

12-24 Volts AC or DC

Auto voltage sensing - no jumpers to set

Single relay

Supplied with whip antenna, three feet of coaxial cable and bulkhead connector

Power: 12-30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered

Frequency: 300 MHz and 310 MHz

Dimensions: 3.625 x 5.25 x 1.5 inches

PRODUCT INFO PAGES

Click Here for Instructions

We have 15 years experience working on these products in the field. Please contact us if we can be of any assistance!