Reno A&E PLB-24-150 Universal SC/DB 24ft w/150' lead
Reno A&E PLB-24-150 Universal SC/DB 24ft w/150' lead
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
The Reno A&E PLB-24-150 is a preformed inductive loop for a 1/4 in saw cut or direct burial, with a 24 ft loop perimeter and a 150 ft lead-in cable. The loop and lead-in arrive factory-spliced in a sealed splice cylinder.
The loop cable is four-conductor #22 AWG stranded tinned copper and the lead-in is two-conductor #20 AWG, both about 0.23 in OD. Insulation and jackets are cross-linked polyethylene (XLPE) rated to 426°F, and the cables and splice cavity are filled with water block gel. The loop cable is 6 in longer than the stated perimeter so it can be adjusted in the slot for an exact fit, with no 45° corner cuts. Each loop is salt-water soak tested. Covered by a 10-year limited warranty.
What's Included
- Preformed loop with 150 ft lead-in cable and splice cylinder (0.95 in dia x 3.8 in long)
Before You Order
- Model format is PLB-perimeter-lead: PLB-24-150 is a 24 ft perimeter loop with a 150 ft lead-in.
- Saw cut the loop and lead-in slots 1/4 in wide and at least 1-1/4 in deep. Set the splice cylinder in a 1 to 1-1/4 in drilled hole.
- Fill the slots with loop sealant, using backer rod where needed. Sealant and backer rod are sold separately.
- Rebar or mesh can cut loop sensitivity by up to 90%. Keep the loop 6 in from parallel rebar and 2 in above reinforcement.
- For direct burial under hot asphalt, Reno A&E calls for the PLH loop instead.
- Requires a vehicle loop detector, sold separately.
- Loop Type: Saw Cut Or Direct Burial
- Specially Designed For An Exact Fit
- Eliminates Need For 45 Degree Corners
- Water Block Gel Prevents Moisture Penetration
- Loop And Lead In Cables Are Flexible And Easy To Install
- Splice Connections Soldered, Sealed, And Tested
- Loop Perimeter: 24 ft
- Lead-In Length: 150 ft
- Four Conductor Loop Cable: #22 AWG stranded tinned copper
- Loop Cable Nominal OD: 0.230 in
- Nominal XLPE Insulation: 0.020 in
- XLPE Outer Jacket: 0.040 in
Saw-cut or direct-burial vehicle detection loop for gate, barrier and parking lanes.
- Residential driveway gates
- Commercial slide and swing gates
- Barrier arm lanes
- Parking garage entry and exit
- Retrofit loops in existing pavement
- Direct burial under new pavers or base
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com