Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
The HySecurity SlideDriver 40 diagram on this page is clickable. Pick a part in the photo and its part number comes up. The same parts are listed below by assembly if you would rather scan a list. Photo views show the front, control box, drive system, pump pack, rear of the pump pack, top and back of the slide gate operator, with a schematic pump pack drawing and an electrical view.
Identify your model
The SlideDriver 40 is the 222 E ST model. HySecurity rates it for 4,000 lb gates at about 1 ft per second, with a 1 hp motor and a 1000 psi relief limit. The SlideDriver 15 shares the 1 hp motor but is rated for only 1,500 lb, so check the model code before you order a pump pack. Check the voltage and phase on the operator nameplate before you order a motor.
Related models: HySecurity SlideDriver 15, HySecurity SlideDriver 30F, HySecurity SlideDriver 50VF2/3, HySecurity SlideDriver II SD15
Operator and manuals
- Operator: HySecurity SlideDriver II SD40 (Replaces 222 E ST) Slide Gate Operator
- Installation instructions (MX3629-01) (PDF)
- Programming and operations manual (MX3630-01) (PDF)
- SlideDriver parts diagrams (PDF)
- SlideDriver spec sheet (PDF)
Most ordered parts
- HySecurity MX002707 SlideDriver Rueda motriz de 6" (MX002707)
- Interruptor de límite SlideDriver HySecurity MX000672 con cable (MX000672)
- Placa de alimentación de CA HySecurity MX000487 (MX000487)
- Kit de pantalla OLED retrofit Hysecurity MX3542 (MX3542)
- Motor hidráulico HySecurity MX4752 SlideDriver RS-10" estándar (MX4752)
- Módulo de sensor de borde de 2 canales HySecurity MX4018 - HY-2NC (MX4018)
- HySecurity MX001103 Liberación, manual, conjunto de palanca (MX001103)
- Kit de sensor HySecurity MX000091, atrapamiento inherente (MX000091)
Parts list by assembly
Front
Control Box
Drive System
Pump Pack
Pump Pack Back
| Part number | Part |
|---|---|
| MX000091 | Kit de sensor HySecurity MX000091, atrapamiento inherente |
| MX000658 | Válvula de alivio HySecurity MX000658 de 1500 PSI |
Top
| Part number | Part |
|---|---|
| MX3399 | Teclado HySecurity MX3399, controlador táctil inteligente |
| MX3542 | Kit de pantalla OLED retrofit Hysecurity MX3542 |
Common questions
What is the weight rating of the SlideDriver 40?
HySecurity lists the SlideDriver 40 (222 E ST) for gates up to 4,000 lb, at about 1 ft per second.
Which motor does the SlideDriver 40 use?
The SlideDriver 15 and 40 use a 1 hp motor with a 1000 psi maximum relief setting. Pick the motor that matches the voltage and phase on your operator nameplate.