Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
This page is a parts diagram for the HySecurity SlideDriver 15 hydraulic slide gate operator. Step through the photo views of the main chassis, drive section, pump pack, control box and top of the unit, plus schematic drawings of the drive, control box and pump pack. The list below gives the part number for each part, grouped by assembly. Match motor voltage and phase to the label on your operator before you order.
Identify your model
The SlideDriver 15 carries the HySecurity code 222 SS ST and is rated for gates up to 1,500 lb at about 1 ft per second. The SlideDriver 30F (222 EX 1.7 ST), 40 (222 E ST) and 50VF2/3 (222 X3 ST) look similar but handle heavier gates. The 15 and 40 use a 1 hp motor, so check the voltage and phase on the operator nameplate before you order a motor. If your unit has a SmartTouch 725 controller, it is a SlideDriver II.
Related models: HySecurity SlideDriver 30F, HySecurity SlideDriver 40, HySecurity SlideDriver 50VF2/3, HySecurity SlideDriver II SD15
Operator and manuals
- Operator: HySecurity SlideDriver II SD15 (Replaces 222 SS ST) Slide Gate Operator
- Installation instructions (MX3629-01) (PDF)
- Programming and operations manual (MX3630-01) (PDF)
- SlideDriver parts diagrams (PDF)
- SlideDriver spec sheet (PDF)
Most ordered parts
- HySecurity MX002707 SlideDriver 6" Drive Wheel (MX002707)
- HySecurity MX4125 - HY-5B Loop Detector ***New Part # MX4621*** (MX4621)
- HySecurity MX000672 SlideDriver Limit Switch w/ Cable (MX000672)
- HySecurity MX000487 AC Power Supply Board (MX000487)
- HySecurity MX001827/MX4994 Wheel, AdvanceDrive, Replacement, 6 inch (MX001827)
- HySecurity MX4752 SlideDriver Hydraulic Motor RS-10" Standard (MX4752)
- HySecurity MX001103 Release, Manual, Toggle Assembly (MX001103)
- HySecurity MX000091 Sensor Kit, Inherent Entrapment (MX000091)
Parts list by assembly
Control Box
Main
| Part number | Part |
|---|---|
| MX000496 | Hysecurity MX000496 SlideDriver Replacement Chassis |
| MX000455 | HySecurity MX000455 SlideDriver Standard Green Cover |
| MX001216 | HySecurity MX001216 Reset Button, External |
| MX000672 | HySecurity MX000672 SlideDriver Limit Switch w/ Cable |
Drive Section
Pump Pack
Common questions
What is the gate weight limit for the SlideDriver 15?
HySecurity rates the SlideDriver 15 (222 SS ST) for gates up to 1,500 lb, with a travel speed of about 1 ft per second.
How do I release the SlideDriver 15 to move the gate by hand?
Stop the gate and turn the power off. Remove the front chassis cover and pull the toggle handle down. The release is spring loaded and drops fast, so keep your hands clear.
What power circuit does the SlideDriver need?
HySecurity specifies a 20A circuit at minimum, protected by a 20A inverse time breaker, for all AC power connections.