Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
Find replacement parts for the HySecurity SlideDriver 50VF2/3 slide gate operator in the interactive diagram below. Click a marked part to read its part number, or work from the parts list that follows the diagram. The photos cover the front, drive section, pump pack, control box, top and back of the operator. Schematic views of the drive, control box and pump pack are included for reference.
Identify your model
The SlideDriver 50VF2/3 is the 222 X3 ST model, rated for 5,000 lb gates. It is a variable speed unit with a 2 hp motor. The 50VF2 closes at about 2.2 ft per second and the 50VF3 at about 3 ft per second. It uses four slowdown limit ramp kits, which the other SlideDriver models do not.
Related models: HySecurity SlideDriver 15, HySecurity SlideDriver 30F, HySecurity SlideDriver 40, HySecurity SlideDriver II SD15
Operator and manuals
- Operator: HySecurity SlideDriver II SD50F (Replaces 222 X3 ST) Slide Gate Operator
- Installation instructions (MX3629-01) (PDF)
- Programming and operations manual (MX3630-01) (PDF)
- SlideDriver parts diagrams (PDF)
- SlideDriver spec sheet (PDF)
Most ordered parts
- HySecurity MX3132 SlideDriver 8" Drive Wheel (MX3132)
- HySecurity MX000672 SlideDriver Limit Switch w/ Cable (MX000672)
- HySecurity MX000487 AC Power Supply Board (MX000487)
- Hysecurity MX3542 OLED Retro Fit Display Kit (MX3542)
- HySecurity MX4752 SlideDriver Hydraulic Motor RS-10" Standard (MX4752)
- HySecurity MX001103 Release, Manual, Toggle Assembly (MX001103)
- HySecurity MX4018 2-Channel Edge Sensor Module - HY-2NC (MX4018)
- HySecurity MX001149 SlideDriver Hydraulic Motor RS-10" Standard ***New Part # MX4752*** (MX001149)
Parts list by assembly
Front
Drive Section
Pump Pack
Control Box
Top
Common questions
Can the SlideDriver 50VF2/3 run on 120V?
No. HySecurity states that 50VF-series operators cannot be connected to 120V single phase power or 575V three phase power.
How fast does the 50VF2/3 move the gate?
It is factory set to about 2 ft per second. Close speed is about 2.2 ft per second on the 50VF2 and about 3 ft per second on the 50VF3.
What is the gate weight limit?
HySecurity rates the SlideDriver 50VF2/3 (222 X3 ST) for gates up to 5,000 lb.