Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
The HySecurity SlideDriver 40 diagram on this page is clickable. Pick a part in the photo and its part number comes up. The same parts are listed below by assembly if you would rather scan a list. Photo views show the front, control box, drive system, pump pack, rear of the pump pack, top and back of the slide gate operator, with a schematic pump pack drawing and an electrical view.
Identify your model
The SlideDriver 40 is the 222 E ST model. HySecurity rates it for 4,000 lb gates at about 1 ft per second, with a 1 hp motor and a 1000 psi relief limit. The SlideDriver 15 shares the 1 hp motor but is rated for only 1,500 lb, so check the model code before you order a pump pack. Check the voltage and phase on the operator nameplate before you order a motor.
Related models: HySecurity SlideDriver 15, HySecurity SlideDriver 30F, HySecurity SlideDriver 50VF2/3, HySecurity SlideDriver II SD15
Operator and manuals
- Operator: HySecurity SlideDriver II SD40 (Replaces 222 E ST) Slide Gate Operator
- Installation instructions (MX3629-01) (PDF)
- Programming and operations manual (MX3630-01) (PDF)
- SlideDriver parts diagrams (PDF)
- SlideDriver spec sheet (PDF)
Most ordered parts
- HySecurity MX002707 SlideDriver 6" Drive Wheel (MX002707)
- HySecurity MX000672 SlideDriver Limit Switch w/ Cable (MX000672)
- HySecurity MX000487 AC Power Supply Board (MX000487)
- Hysecurity MX3542 OLED Retro Fit Display Kit (MX3542)
- HySecurity MX4752 SlideDriver Hydraulic Motor RS-10" Standard (MX4752)
- HySecurity MX4018 2-Channel Edge Sensor Module - HY-2NC (MX4018)
- HySecurity MX001103 Release, Manual, Toggle Assembly (MX001103)
- HySecurity MX000091 Sensor Kit, Inherent Entrapment (MX000091)
Parts list by assembly
Front
Control Box
| Part number | Part |
|---|---|
| MX4018 | HySecurity MX4018 2-Channel Edge Sensor Module - HY-2NC |
| MX000487 | HySecurity MX000487 AC Power Supply Board |
| MX000485 | HySecurity MX000485 Motor Contactor |
| MX000486 | HySecurity MX000486 Transformer 24VAC 75VA 60Hz - All 60Hz except 575VAC |
| MX3356 | Hysecurity MX3356 Board, Display |
| MX000046 | HySecurity MX000046 Cable, Ribbon, LCD |
| MX000033 | Hysecurity MX000033 PSB to STC Wiring Harness |
Drive System
Pump Pack
Pump Pack Back
| Part number | Part |
|---|---|
| MX000091 | HySecurity MX000091 Sensor Kit, Inherent Entrapment |
| MX000658 | HySecurity MX000658 1500 PSI Relief Valve |
Top
| Part number | Part |
|---|---|
| MX3399 | HySecurity MX3399 Keypad, Smart Touch Controller |
| MX3542 | Hysecurity MX3542 OLED Retro Fit Display Kit |
Common questions
What is the weight rating of the SlideDriver 40?
HySecurity lists the SlideDriver 40 (222 E ST) for gates up to 4,000 lb, at about 1 ft per second.
Which motor does the SlideDriver 40 use?
The SlideDriver 15 and 40 use a 1 hp motor with a 1000 psi maximum relief setting. Pick the motor that matches the voltage and phase on your operator nameplate.