Diablo DSP-19 Loop Detector (Liftmaster Compatible)
Manuals & Support · installation manuals, wiring diagrams and troubleshooting
Diablo DSP-19 Loop Detector (Liftmaster Compatible)
Manuals & Support · installation manuals, wiring diagrams and troubleshooting
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
- 10 In-Stock & ready to ship
Description
The Diablo Controls DSP-19 is a low power single channel plug-in loop detector for LiftMaster CSW24 operators and other models that take the same plug-in detector. It runs on 8 to 35 VDC and draws 1 mA max with no call (sensitivities 0 to 6). It has a rear Molex connector and measures 2.362 x 0.866 x 2.008 in.
The single open-drain solid-state output is rated 250 mA at 30 V. A front DIP switch selects fail-safe or fail-secure. It works with a standard loop or the Diablo Free Exit Probe, has sensitivity boost for semi trucks, and extended presence that can hold most calls for more than 12 hours. The green LED blips every two seconds in low power mode and stays on during activity. Loop inductance range is 20 to 1500 µH. It operates from -35°F to 165°F.
Before You Order
- For LiftMaster CSW24 and other operators that use this plug-in detector. DC power only.
- Never use fail-secure, or a Free Exit Probe, on a safety loop.
Extremely low power. Less than 1ma of current draw in the non-detect state.
- Can be connected to a standard inductive loop as well as Diablo Controls free exit probes.
- Single Solid State Open Drain output that can sink over 250 milliamps.
- Front switch selectable Failsafe or Fail-secure operation.
- Wide operating voltage range with extended low-voltage operation.
- Sensitivity Boost for applications detecting semi-trucks.
- Extended Presence able to hold most calls for more than 12 hours.
LED Indicators: The green Power LED will be on blip on once every two seconds to indicate the detector is powered and operating normally in the low power mode. The LED will be on solid when there is possible activity over the loop. If the LED is not in one of these two modes, it is indicating a current or prior fault.
Failure Operation: In fail-safe, the detector will output a detect when the loop circuit is failed. In fail-secure, the detector will not output a detect when the loop circuit is failed. Set DIP switch 6 to off to operate in fail-safe mode. Set the switch to on to operate in fail-secure mode. Note: Never use a fail-secure detector for a safety loop.
Loop Inductance: 20uH to 1500 uH (Including lead-in)
Power: This detector is powered with 8 to 35 volts DC.
Operating Current: Sensitivities 0-6: Without calls is 1.00 ma maximum, with a call is 26.00 ma maximum
Sensitivities 7-0: Without calls is 1.60 ma maximum, with a call is 26.00 ma maximum
Output Ratings: Open-Drain Solid State Output: 250 milliamps @ 30 volts
Connector: Rear Molex Connector.
1: Loop or Mini-Loop
2: Loop or Mini-Loop
3: No Pin
4: N/C
5: N/C
6: N/C
7: N/C
8: Power – and Output common
9. Power +
Size: Height: 2.362″ Width: 0.866″ Depth: 2.008”
Operating Temperature: –35°F to 165°F (-37°C to 74°C)
DSP-19: Detector only
DSP-19-75: Detector +75′ Probe
DSP-19-100: Detector + 100′ Probe
Manuals & Support: installation manuals, wiring diagrams and troubleshooting
Plug-in loop detection for LiftMaster operators that take this style of plug-in detector.
- LiftMaster CSW24 swing operators
- Free exit loops
- Safety and reversing loops
- Mini-loop free exit
- Solar and DC gate operators
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com