Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
Use this interactive diagram to find parts for the HySecurity SlideDriver 30F slide gate operator. Click any marked part on the photo to see its name and part number, or scroll to the list under the diagram. Views cover the front of the operator, the control box, the drive system, the pump pack with its schematic, the top panel with the keypad, the back and the electrical layout.
Identify your model
The SlideDriver 30F is the 222 EX 1.7 ST model, rated for 3,000 lb gates at 1.7 ft per second. It runs a 2 hp motor with a 1350 psi relief limit, where the 15 and 40 run 1 hp at 1000 psi. Its relief valve adjusts with a hex socket screw instead of a hex head. Match the voltage on the operator nameplate before ordering a motor or transformer.
Related models: HySecurity SlideDriver 15, HySecurity SlideDriver 40, HySecurity SlideDriver 50VF2/3, HySecurity SlideDriver II SD15
Operator and manuals
- Operator: Hysecurity SlideDriver 30F 222 EX 1.7 ST Slide Gate Operator ***(2) 230V 1Phase In Stock - Special Pricing***
- Installation instructions (MX3629-01) (PDF)
- Programming and operations manual (MX3630-01) (PDF)
- SlideDriver parts diagrams (PDF)
- SlideDriver spec sheet (PDF)
Most ordered parts
- HySecurity MX002707 SlideDriver Rueda motriz de 6" (MX002707)
- Interruptor de límite SlideDriver HySecurity MX000672 con cable (MX000672)
- Placa de alimentación de CA HySecurity MX000487 (MX000487)
- Kit de pantalla OLED retrofit Hysecurity MX3542 (MX3542)
- Motor hidráulico HySecurity MX4752 SlideDriver RS-10" estándar (MX4752)
- Módulo de sensor de borde de 2 canales HySecurity MX4018 - HY-2NC (MX4018)
- HySecurity MX001103 Liberación, manual, conjunto de palanca (MX001103)
- Kit de sensor HySecurity MX000091, atrapamiento inherente (MX000091)
Parts list by assembly
Front
Control Box
Drive System
Pump Pack
Top
Electrical
| Part number | Part |
|---|---|
| MX000369 | Placa de alimentación de CC Hysecurity MX000369 |
| MX002124 | Interruptor de reinicio interno HySecurity MX002124 |
Common questions
How heavy a gate can the SlideDriver 30F move?
HySecurity rates the SlideDriver 30F (222 EX 1.7 ST) for gates up to 3,000 lb, at about 1.7 ft per second.
What motor and pressure setting does the 30F use?
The 30F uses a 2 hp motor, and its relief valve maximum is 1350 psi. The relief valve adjusts with a hex socket screw.
When can I use the manual release?
Only when the gate is not moving and the power is off. Remove the front chassis cover and pull the toggle handle down. The mechanism is spring loaded and drops fast.